POD HD500 Advanced Guide (Rev G) - English.pdf - Musifex

FX Edit ModeFX Edit ModeWithin this chapter, we’ll cover the Edit Mode for FX, which provides access to all editableparameters for the FX models and the FX Loop. (For info on Amp Models, see “EditingAmp Parameters” on page 6•6.) All changes made in the Edit Mode are saved per Preset.Accessing FX Edit ModeFirst press the VIEW button to display the Signal Flow View screen.SAVEPRESETS5•1HOLD FOR SYSTEM & I/OVIEWThe Signal Flow View - Modulation FX Block selectedUse the Nav. Disc buttons to select the Block you wish to edit. In our example above,we’ve selected the first Block, which currently has a Modulation Model loaded. While inthe Signal Flow View, you can edit a few options for the selected Block’s FX Model usingthe Multi-select Knobs 1 - 4. However, by entering the Edit Mode screen, you’ll haveinstant access to all parameters. Double-press the ENTER button to display Edit Mode.ENTERAMP & FX ON / OFFDBL PRESS TO ASSIGN CTLMOVEThe FX Edit Mode - Modulation:U-Vibe FX Model loaded