MVME5100 Single Board Computer Installation and Use - Bustec

Overview of ContentsThe following paragraphs briefly describe the contents of each chapter.Chapter 1, Hardware Preparation and Installation, provides a descriptionof the MVME5100 and its main integrated PMC and IPMC boards. Theremainder of the chapter includes an explanation of the installationprocedure, including preparation and jumper setting information.Chapter 2, Operation, provides a description of the operational functionsof the MVME5100 including tips on applying power, a description of theswitch settings, the status indicators, I/O connectors, and system power upinformation.Chapter 3, PPCBug Firmware, provides an explanation of the debuggerfirmware, PPCBug, on the MVME5100. The chapter includes an overviewof the firmware, a section on how to use PPCBug, a listing of theinitialization steps, a brief explanation of the two main configurationcommands CNFG and ENV, and a description of the standardconfiguration parameters. A listing of the basic commands are alsoprovided.Chapter 4, Functional Description, provides a summary of theMVME5100 features, a block diagram, and a description of the majorfunctional areas.Chapter 5, Pin Assignments, provides a listing of all connector and headerpin assignments for the MVME5100.Chapter 6, Programming the MVME51xx, provides a description of thememory maps on the MVME5100 including tables of default processormemory maps, suggested CHRP memory maps, and Hawk PPC registervalues for suggested memory maps. The remainder of the chapter providessome programming considerations.Appendix A, Specifications, provides the standard specifications for theMVME5100, as well as some general information on cooling.Appendix B, Troubleshooting, provides a brief explanation of the possibleresolutions for basic error conditions.xix