SMP Calibration Kits - Spectrum Elektrotechnik GmbH

SMP Calibration Kit DetailsTHE GAUGES:Gauges with a variety of Resolutions are available.For specific information please refer to the sectionII.2 “Connector Interface Gauges”, page 75 f.f.Four High Precision Gauges and two CalibrationBlocks are supplied with the ProfessionalCalibration Kit. Each of the Gauge are serializedand set for a certain task, marked properly onthe back.-SMP male Center Conductor Gauge-SMP male Dielectric Gauge-SMP female Center Conductor Gauge-SMP female Dielectric GaugePrecision Gauges are available for most otherconnector series.TORQUE WRENCH:For the especially designed CalibrationComponents that are employing additionalthread, the Torque Wrench should be used toensure proper coupling and to avoidovertorquing.The Torque Wrench is set to 0.7 Nm(6.2 inch-pounds).Torque Wrenches are available also for mostother connector series.Date: 04.98TEST FIXTURES:Spectrum Elektrotechnik GmbH offers avariety of test fixtures to allow professionaltesting in shortest time.The fixture to the left is used to safely hold inplace the Bayonet Mount 2.9mm to SMPAdapter for testing small cable assemblies, thatare terminated with an SMP right angleconnector.smp.pm6Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)33