SMP Calibration Kits - Spectrum Elektrotechnik GmbH

LRL/TRL Calibration KitsProfessional Calibration Kit11 14 1516 16781213disk931041819171711521222012623 24The actual layout of the Calibration Kit may differ from the schematic above, it also depends on the connectorseries and its size (this applies also for the No. of Gauges). The Instrument Cases for the Standard andProfessional Kit are same per Connector series. You may start with a Standard Calibration Kit and fill theempty spots at a later stage to end up with a Professional Calibration Kit.Description of Equipment Provided Professional Calibration Kit1: Ideal Outer Conductor forAdapter short, female/female2: Ideal Outer Conductor forAdapter long, female/female3: Ideal Outer Conductor forAdapter short, female/male4: Ideal Outer Conductor forAdapter long, female/male5: Ideal Outer Conductor forAdapter short, male/male6: Ideal Outer Conductor forAdapter long, male/male7: Set of Ideal Center Conductorsfor Adapter short, female/female8: Set of Ideal Center Conductorsfor Adapter long, female/female9: Set of Ideal Center Conductorsfor Adapter short, female/male10: Set of Ideal Center Conductorsfor Adapter long, female/male11: Set of Ideal Center Conductorsfor Adapter short, male/male12: Set of Ideal Center Conductorsfor Adapter long, male/male13: Software Configuration Medium14: Torque Wrench15: Set of double ended wrenches16: Set of Interface Gauges for centerconnector location*17: Set of Gauge Calibration Blocks18: Short female19: Short male20: Center Contact Insertion Tool21, 22, 23, 24: Optional Adapters to bespecified with the order. For detailsplease refer to the specific orderinginformation.trefli.pm6*The resolution is to be specified and whether inch or metric gauges. For details please refer to Section II.2 “Connector Interface Gauges”, page 75 f.f.Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)39