cb sx operating manual

More documents

Recommendations

Info

Use and maintenance instructionse) Handle for brush roller raising and lowering;f) Belt SPZ Sv.800;g) Brush motor diam. 200 HP2 2 poles, for diam. 100 HP 0.75 4 poles;h) Brush roller protection casing;i) Roller position elevation/lowering indicator.The brush roller (see Fig. ’Gruppo rullo satinatore o spazzolatore diam. 200mm’ page 106) is adjusted in the following manner:1. Remove casing indicated by (H);2. loosen the belt and lower motor (G);3. Remove belt (F);4. Unscrew bearings (B);5. Unscrew ring-nut (D);6. When the bearings and the ring-nut have been unscrewed, the roller isready to be extracted;7. Operate handle (F) according to indicator (I) to adjust removal.Fig. 4.35 Gruppo rullo satinatore o spazzolatore diam. 200 mm4.14 ADJUSTMENT OF THE RUBBER-COVERED ROLLERA) Pressure gauge indicating the pressure of the rubber-covered roller;B) Pressure regulator of the rubber-covered roller.1068/1/04 COMMISSIONING THE MACHINE
Use and maintenance instructionsABFig. 4.36 Pressure gaugeFig. 4.37 Rubber-covered roller4.15 AIR PRESSURE REGULATOR SHOES1. Manometer showing air pressure shoes;2. Air pressure regulator shoes.N.B.: When the machine is used for sizing, reset the pressure of the shoesshown on pressure gauge (1) to zero by means of the regulator (2). When themachine is used for sanding with floating table, regulate the pressurer at 6bar.COMMISSIONING THE MACHINE 8/1/04 107
Page 1:
MANUALE ISTRUZIONI e MANUTENZIONEIN
Page 4 and 5:
INTENDED AND IMPROPER MACHINE USE 1
Page 6 and 7:
Roller units 75Pad units 76RULES FO
Page 9:
THANKSDear Customer,We are pleased
Page 13 and 14:
WARRANTYYEAR OF MANUFACTURE .......
Page 15:
Assistance Price ListCB LEVIGATRICI
Page 18 and 19:
Use and maintenance instructions1.1
Page 20 and 21:
Use and maintenance instructionsPle
Page 22 and 23:
Use and maintenance instructionsTab
Page 24 and 25:
Use and maintenance instructionsTab
Page 26 and 27:
Use and maintenance instructions108
Page 28 and 29:
Page 30 and 31:
Use and maintenance instructionsIMP
Page 32 and 33:
Use and maintenance instructionsFig
Page 34 and 35:
Page 36 and 37:
Use and maintenance instructionsThi
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Use and maintenance instructionsCar
Page 52 and 53:
Page 54 and 55:
Use and maintenance instructionsIte
Page 56 and 57:
Use and maintenance instructionsfor
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Use and maintenance instructionsThi
Page 66 and 67:
Use and maintenance instructions41.
Page 68 and 69:
Page 70 and 71:
Use and maintenance instructionsocc
Page 72 and 73: Use and maintenance instructionsNOT
Page 74 and 75: Use and maintenance instructions4.2
Page 76 and 77: Use and maintenance instructionsAtt
Page 80 and 81: Use and maintenance instructionsAFi
Page 84 and 85: Use and maintenance instructionsSim
Page 86 and 87: Use and maintenance instructionsTab
Page 88 and 89: Use and maintenance instructions•
Page 90 and 91: Use and maintenance instructionsh)
Page 92 and 93: Use and maintenance instructionsMLC
Page 94 and 95: Use and maintenance instructions•
Page 96 and 97: Use and maintenance instructionsFig
Page 126 and 127: Use and maintenance instructions110
Page 132 and 133: Use and maintenance instructionsrio
Page 134 and 135: Use and maintenance instructionsBef
Page 148 and 149: Use and maintenance instructionsSym
Page 152 and 153: Use and maintenance instructionsNOT
Page 158 and 159: Use and maintenance instructionsFee
Page 160 and 161: Use and maintenance instructionsWor
Page 167: CB LEVIGATRICI s.r.l.via Carpi - Ra
show all

cb sx operating manual

Create successful ePaper yourself

Delete template?

Save as template?