cb sx operating manual

More documents

Recommendations

Info

Use and maintenance instructions45°Fig. 3.1Cable angle for lifting3.1.2 Storage3.2 POSITIONINGAlways refer to the weight of the machine shown on the plate (See Fig. “Machineidentification plate” chapter “MACHINE DESCRIPTION AND USE”) locatedon the rear of the machine.If the weight of the lift-truck is suitable for the weight of the machine, as shownon the identification plate, lift it after inserting non-slip material between theforks and the bed of the machine which features the wooden base used fortransport.Position the forks at max distance from each other in order to ensure safe machinelifting. To do this, secure the machine to the truck mast using sturdy cablesor chains fitted in the special lifting holes on the upper part of themachine.When moving the machine, never stand in the <strong>operating</strong> area.Never leave the machine exposed to the weather and grease all parts thatcould rust in the event of long storage.The environment must be dry with temperatures between 0° C and 50° CThe machine must be positioned in a space of suitable size, with enough lightand air and on a flat floor.328/1/04 INSTALLATION
Use and maintenance instructions3.2.1 PositioningBefore installing the machine, remove the 4 metal sheet supports from thecase + insert them as shown in the diagram at the chapter “TECHNICALCHARACTERISTICS”. Due to its considerable weight, the machine needsnot be anchored, make sure however that the flooring is strong enough andthat there are no other vibrating machines nearby.BEFORE ANY OPERATION, THE MACHINE SHOULD BE POSITIONEDBY TURNING THE 4 SCREWS AT THE LOWER ENDS OF THE MACHINE,THEN LEVELLED BY MEANS OF AN AIR BUBBLE PRECISION GAUGEWHICH IS TO BE PLACED ALTERNATIVELY AT THE REAR AND AT THEFRONT PART OF THE BELT TABLE.3.2.2 Minimum space for safe operationBefore positioning the machine, make sure the work area is large enough forcorrect operation.The work area around the machine must be free of objects that could hinderoperator activities, such as shelves or other structures.3.3 PREPARING THE MACHINE FOR OPERATIONBefore connecting the machine up to the various supply points, the followingoperations must be performed.3.3.1 Check any damage suffered by the machineUpon machine receipt, make sure there are no signs of damage caused duringtransport. If there are, immediately notify the carrier or contact the dealerand/or manufacturer directly.3.3.2 Assembling the machineFor transport requirements, the machine could be delivered with a number ofparts dismantled. Before starting work, make sure the following parts havebeen fitted:• Before installating the machine, remove the 4 metal sheet supports fromthe case.3.3.3 Cleaning the machineTo prevent rust forming, the machine is carefully greased. Before startingwork, carefully remove the grease from the work areas and protection devicesusing a suitable and harmless thinner.INSTALLATION 8/1/04 33
Page 1: MANUALE ISTRUZIONI e MANUTENZIONEIN
Page 4 and 5: INTENDED AND IMPROPER MACHINE USE 1
Page 6 and 7: Roller units 75Pad units 76RULES FO
Page 9: THANKSDear Customer,We are pleased
Page 13 and 14: WARRANTYYEAR OF MANUFACTURE .......
Page 15: Assistance Price ListCB LEVIGATRICI
Page 18 and 19: Use and maintenance instructions1.1
Page 20 and 21: Use and maintenance instructionsPle
Page 22 and 23: Use and maintenance instructionsTab
Page 26 and 27: Use and maintenance instructions108
Page 30 and 31: Use and maintenance instructionsIMP
Page 32 and 33: Use and maintenance instructionsFig
Page 36 and 37: Use and maintenance instructionsThi
Page 50 and 51: Use and maintenance instructionsCar
Page 54 and 55: Use and maintenance instructionsIte
Page 56 and 57: Use and maintenance instructionsfor
Page 64 and 65: Use and maintenance instructionsThi
Page 66 and 67: Use and maintenance instructions41.
Page 70 and 71: Use and maintenance instructionsocc
Page 72 and 73: Use and maintenance instructionsNOT
Page 76 and 77: Use and maintenance instructionsAtt
Page 80 and 81: Use and maintenance instructionsAFi
Page 84 and 85: Use and maintenance instructionsSim
Page 88 and 89: Use and maintenance instructions•
Page 90 and 91: Use and maintenance instructionsh)
Page 92 and 93: Use and maintenance instructionsMLC
Page 94 and 95: Use and maintenance instructions•
Page 98 and 99:
Use and maintenance instructionsTab
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Use and maintenance instructions4.1
Page 122 and 123:
Use and maintenance instructionse)
Page 124 and 125:
Use and maintenance instructionsFig
Page 126 and 127:
Use and maintenance instructions110
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Use and maintenance instructionsrio
Page 134 and 135:
Use and maintenance instructionsBef
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Use and maintenance instructionsSym
Page 150 and 151:
Page 152 and 153:
Use and maintenance instructionsNOT
Page 154 and 155:
Page 156 and 157:
Use and maintenance instructionsFig
Page 158 and 159:
Use and maintenance instructionsFee
Page 160 and 161:
Use and maintenance instructionsWor
Page 162 and 163:
Page 164 and 165:
Page 167:
CB LEVIGATRICI s.r.l.via Carpi - Ra
show all

cb sx operating manual

Create successful ePaper yourself

Delete template?

Save as template?