cb sx operating manual

Use and Maintenance instructions2SAFETY AT WORKCHAPTER2.1 GENERAL SAFETY RULESThe machine operator and the person in charge of operations must carefully andfully read this instruction booklet before working with the machine.Look after this manual carefully. It should be a constant reference for the operatorfor all those requirements that could arise during the life of the machine.The Manufacturer is engaged in constantly updating its products with consequentpossible changes to machine parts.All the technical information contained in this manual belong to the Manufactureronly and should be considered of a confidential nature.Even partial reproduction and disclosure of such information is therefore forbiddenwithout the written permission of the manufacturer.Using this manual for purposes other than those strictly related to machine installation,operation and maintenance is forbidden.In an attempt to explain how to operate and adjust the machine in a better andclearer way, some illustrations may show the machine without safety guards; neverever use the machine in this condition and, if maintenance jobs or repairs are done,follow the instructions in the "PERIODIC MAINTENANCE" chapter of this manual.The machine has been built in conformity with the safety regulations of EEC Directive98/37. The replacement of parts must be done using component parts acquireddirectly from the Manufacturer. The use of parts not supplied by the Manufacturer,or failure to carefully follow the maintenance instructions indicated in this manualwill automatically release the Manufacturer from all liability.2.1.1 SymbolsTo highlight those parts of the manual relating to personal safety, the following symbolshave been used for machine operation and maintenance:SAFETY AT WORK 8/1/04 13