cb sx operating manual

More documents

Recommendations

Info

Use and maintenance instructionsTab. A: Control Sheet30) Check of automatic, commutating time, star delta, triangle ofmain motors, as soon as the ammeter arrives at the bottom of thescale it must start.31) Check of front and rear belt roller-unit alignment.32) Check of speed indicator zero-setting on the speed-variators.33) Check the differential pressure on the floating table cylinder,of small tables, the blockage and unblockage of pneumatic shoepressers.34) Check the correct sequence of all the semi-automatic or automaticsystems commanded and controlled by electronic systems,type: cycle and sequences of various pad units, blowers, positioningect.35) According to machine model, the following working checks ondifferent materials and surfaces should be carried out, eg: hardwood,chipboard,MDF,veneered surfaces of various type on differentsupports, paints ect.36) N.B. Added to the above points the relative rules of the concerenedcountry must be checked.37) The maintenance and use handbook must be checked toensure conformation to the relative machine.38) After first workshop testing, a copy for the After-Sales Departmentshould be filed. One copy should be inserted in the InstructionManual provided with the machine, which after testing in thecustomer’s facility will remain, once completed, at the customer’sdisposal.The tester’s copy must be signed by the customer and returnedto the After-Sales Department.68/1/04 COMMISSIONING AND US-
Use and maintenance instructionsTab. B: Control SheetMACHINE MODEL:Serial number:Year of manufacture:Internal Tester:CUSTOMER:Adress:Telephone number:External Tester:Stamp and signature of the customer:Test control diagram1) Check that the composition of the machine confirms to the writtenorder and in return the serial number confirms to the one writtenon the order.2) Check the lifting units (screws, roughness of the screw thred0,8, lock nuts, screw thread control).3) Check the lifting units (pistons and MS jackets and check theporosity for the oil tight joint).DateDateInternalExternal4) Check the flatness and parallelism of the belt holder tablebefore assembly the rollers.5) Rigidity and parallelism control and check the correct alignmentof the table in relation to the roller.mm 0.02mm 0.026) Check the working tension based on the order. Volt7) Regulate the working pressure of the entrance pneumatic system.Bar 68) Check the correct operation of the gauges indicating the pneumaticoperation pressure.9) Check the oil level in the pneumatic lubricators and control themicro-mist which should let a drop fall every........ 20/30”10) Check the grease in the table lifting screws (only where foreseen).11) Check the oil in the lifting pistons screws (only where foreseen).12)Check the grase content in the bearing lubricators (only whereforseen)COMMISSIONING AND USING THE MACHINE 8/1/04 7
Page 1: MANUALE ISTRUZIONI e MANUTENZIONEIN
Page 4 and 5: INTENDED AND IMPROPER MACHINE USE 1
Page 6 and 7: Roller units 75Pad units 76RULES FO
Page 9: THANKSDear Customer,We are pleased
Page 13 and 14: WARRANTYYEAR OF MANUFACTURE .......
Page 15: Assistance Price ListCB LEVIGATRICI
Page 18 and 19: Use and maintenance instructions1.1
Page 20 and 21: Use and maintenance instructionsPle
Page 24 and 25: Use and maintenance instructionsTab
Page 26 and 27: Use and maintenance instructions108
Page 30 and 31: Use and maintenance instructionsIMP
Page 32 and 33: Use and maintenance instructionsFig
Page 36 and 37: Use and maintenance instructionsThi
Page 50 and 51: Use and maintenance instructionsCar
Page 54 and 55: Use and maintenance instructionsIte
Page 56 and 57: Use and maintenance instructionsfor
Page 64 and 65: Use and maintenance instructionsThi
Page 66 and 67: Use and maintenance instructions41.
Page 70 and 71: Use and maintenance instructionsocc
Page 72 and 73:
Use and maintenance instructionsNOT
Page 74 and 75:
Use and maintenance instructions4.2
Page 76 and 77:
Use and maintenance instructionsAtt
Page 78 and 79:
Page 80 and 81:
Use and maintenance instructionsAFi
Page 82 and 83:
Page 84 and 85:
Use and maintenance instructionsSim
Page 86 and 87:
Use and maintenance instructionsTab
Page 88 and 89:
Use and maintenance instructions•
Page 90 and 91:
Use and maintenance instructionsh)
Page 92 and 93:
Use and maintenance instructionsMLC
Page 94 and 95:
Use and maintenance instructions•
Page 96 and 97:
Use and maintenance instructionsFig
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Use and maintenance instructionse)
Page 124 and 125:
Page 126 and 127:
Use and maintenance instructions110
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Use and maintenance instructionsrio
Page 134 and 135:
Use and maintenance instructionsBef
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Use and maintenance instructionsSym
Page 150 and 151:
Page 152 and 153:
Use and maintenance instructionsNOT
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Use and maintenance instructionsFee
Page 160 and 161:
Use and maintenance instructionsWor
Page 162 and 163:
Page 164 and 165:
Page 167:
CB LEVIGATRICI s.r.l.via Carpi - Ra
show all

cb sx operating manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?