cb sx operating manual

Use and maintenance instructionsTab. B: Control Sheet31) Check of front and rear belt roller-unit alignment.32) Check of speed indicator zero-setting on the speed-variators.33) Check the differential pressure on the floating table cylinder,of small tables, the blockage and unblockage of pneumatic shoepressers.34) Check the correct sequence of all the semi-automatic or automaticsystems commanded and controlled by electronic systems,type: cycle and sequences of various pad units, blowers, positioningect.35) According to machine model, the following working checks ondifferent materials and surfaces should be carried out, eg: hardwood,chipboard,MDF,veneered surfaces of various type on differentsupports, paints ect.36) N.B. Added to the above points the relative rules of the concerenedcountry must be checked.37) The maintenance and use handbook must be checked toensure conformation to the relative machine.38) After first workshop testing, a copy for the After-Sales Departmentshould be filed. One copy should be inserted in the InstructionManual provided with the machine, which after testing in thecustomer’s facility will remain, once completed, at the customer’sdisposal.The tester’s copy must be signed by the customer and returnedto the After-Sales Department.8/1/04 9