Download - Plasmon

Install a Diamond licensePlasmon Technical Support will supply you with a license code via email. This willbe a text string similar to the following:60 pcdslot:4B7A93400B6A069E0316or:maintenance: 4B7A93400B6A069E03163 Make a careful note of this license code.Note: Both licenses are tied to a particular server. Licenses for other serversmust be purchased by following the same procedure using the machine IDfrom the other server.Installing the licenseTo install your license:1 Click Administration in the Administration GUI.You’ll see the available Library Manager Configuration options in the right-handpanel.2 Click Configure Library Manager.You’ll see the Manager Configuration page.3 Enter your license code in the New License field.Make sure you enter the string exactly as supplied by Plasmon Technical Support. Ifyou don’t, Diamond will not work.4 Scroll to the bottom of the Manager Configuration page and click Submit.5 If you have another license code to enter, scroll back to the top of the ManagerConfiguration page and enter the license code in the empty New License field thatappears, then scroll down and click Submit again.6 Go to Using Diamond – An Overview on page 35.Diamond Administrator’s Guide 33