Download - Plasmon

Using the Library Contents PageUSING THE LIBRARY CONTENTS PAGEDiamond’s Library Contents page allows you to see information about disks in yourlibraries, customize the way you view the contents of your libraries and performactions (e.g. export) on a selection of disks.The Library Contents page is displayed by default when you log in to theAdministration GUI.Note: Disks in stand-alone drives are displayed on a different page – seeManaging stand-alone drives on page 85.• By default, the Library Contents page shows all disks in all attached libraries.• You can set up filters that will let you view different subsets of libraries, disks, disktypes and so on. For example, you could set up filters to display:– all DVD-R disks in all libraries– all unscanned disks in a particular library• You can change the way the displayed disks are sorted. For example, you couldsort by:– date last accessed– disk type (CD-R, DVD-ROM and so on)• Using the buttons at the bottom of the Library Contents page you can export,move or rescan selected disks.The Library Contents page does not differentiate between the different types oflibrary you might have connected – it simply displays a list of disks. The type of libraryonly becomes important when you perform actions such as exporting disks. Forexample:• Some libraries use magazines to manage groups of up to ten disks at a time• Some libraries only have fixed slots and an Import Export Element (referred to asthe Mailslot) for importing and exporting a single disk at a time• Some Plasmon G-series libraries have fixed slots, a Mailslot and a Bulk Import-Export (IE) Magazine for importing and exporting up to ten disks at a time• Enterprise D-series libraries have fixed slots and six removable magazines, but noMailslot.Diamond Administrator’s Guide 43