Auto Cross-Stitch® - SINGER Futura Support

More documents

Recommendations

Info

Futura - Auto Cross-Stitch Option - English 1-01
Futura - Auto Cross-Stitch Option - English 1-01Inside Auto Cross-StitchAuto Cross-Stitch is designed to automatically digitize an image(artwork) into an embroidery design with Cross-Stitches. AutoCross-Stitch has a Wizard that walks you through a step-by-stepprocess for creating an automatic embroidery design. In this segment,each step and process will be defined.See the section called “How to Use Auto Cross-Stitch” for a quickdescription of using the Auto Cross-Stitch wizard.add-onAuto Cross-Stitch ®Open WizardYou must launch the Software (see sectioncalled “How to Open FUTURA) to use theAuto Cross-Stitch wizard.Step Action Result>1 Select Auto Cross-Stitch...from the Create drop-downmenu.>2 Click Next.Auto Cross-Stitch Wizard/Introduction page will open.>1: Open ImageThis is the step to choose the image, or artwork to be used withAuto Cross-Stitch. If you are familiar with any Cross-Stitch embroidery,you will appreciate the fact that, simple is better whenit comes to artwork. It is important to use a clean image for thisprocess. A vector type Image (.WMF) like “clipart” works best. If theimage was scanned, it is a Bitmap type (millions of pixels) image– either .bmp or .jpg, and must have a reasonably “high resolution”.150-300 DPI is good. The software will reduce the colors so that itis feasible to stitch the art in embroidery.Step Action Result>1 Choose the Select from theSelect Image box.>2 Choose Image (of yourchoice) from folder whereyour images are stored.>3 Click Next.The Open Image dialoguebox will open.Auto Cross-Stitch ® :Inside Auto Cross-Stitch1
Page 4 and 5: add-onAuto Cross-Stitch ®>2: Crop
Page 6 and 7: add-onAuto Cross-Stitch ®Step Acti

Auto Cross-Stitch® - SINGER Futura Support

Create successful ePaper yourself

Delete template?

Save as template?