z/OS 1.13 User Experience

z/OS 1.13User Experiencez/OS Guide Lahnstein28.09.-30.09.2011Michael.Jaegering@gad.deGAD eG© GAD 2011 © GAD 2011Chart Nr.: 1

Agenda Installation Migration New/Changed Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 2

Installation Migration from z/OS 1.12 to 1.13 ServerPac Installation ordered per Shopz migrated images (at end of September 2011) Test(Sandbox)-Sysplex (4/4) incl. 2 GDPS CS Development-Sysplex (5/6) incl. 2 GDPS CS 1. Production-Sysplex (4/18) incl. 2 GDPS CSbanking production 2. Production-Sysplex (4/8) incl. 2 GDPS CSWebSphere… end of migration is planned for end of October 2011© GAD 2011Chart Nr.: 3

Migration Installation Migration New Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 4

Migrationupdate RACF Templatescheck for Migration Health ChecksZOSMIGVvvRrr_component_program_nameZOSMIGREC_component_program_namecheck for compatibility/toleration PTFsuse SMP/E FIXCAT categoriesIBM.TargetSystem-RequiredService.z/OS.V1R13 orIBM.ProductInstall-RequiredServicesee SMP/E JCL sample below:SET BDY(GLOBAL).REPORT MISSINGFIX ZONES(TZONE)FIXCAT(IBM.TargetSystem-RequiredService.z/OS.V1R13).or.... FIXCAT(IBM.Coexistence.z/OS.V1R13).etc.© GAD 2011Chart Nr.: 5

Migration … use SMP/E FIXCAT categoriesIBM.Coexistence.z/OS.V1R13IBM.Coexistence.ICSF.z/OS_V1R10-V1R12-HCR7780IBM.Coexistence.ICSF.z/OS_V1R11-V1R13-HCR7790newest version of ICSF, FMID HCR7790, announced on July 12, 2011available for download on Sept. 9, 2011 at(http://www.ibm.com/systems/z/os/zos/downloads/)IBM.Coexistence.z/OSMF.V1R13…… see SMP/E FIXCAT Explorer next chart …© GAD 2011Chart Nr.: 6

Migrationinvoking/using the SMP/E FIXCAT Explorer SMP/E Options: 1.1 ADMINISTRATION / DEFINITION:select GLOBAL zone2 OPTIONS (choose your global option name)7 HOLDDATA2 FIXCATselect YES for explorer© GAD 2011Chart Nr.: 7

Migration STC updatesHZR new Real Time Diagnostic (RTD) STC procedure:must run permanentlyPGM name changes from HZRIMAIN (R12) to HZRINIT (R13)DFHSM new start up default: PDA=YES© GAD 2011Chart Nr.: 8

Migration Withdrawns/Replacements(re)moved libraries (DCE/DFS, zFS)SYS1.IOE.SIOELMOD ( moved to SYS1.SIEALNKE)SYS1.EUV.SEUVLINK (DCE base)utility MTFTPS is replaced by AMAPDUPL (SYS1.MIGLIB)also known as PDUUIDCAMS NOIMBED and NOREPLICATEdeleted from LISTCAT outputDCE and DCE/DFS Client (DFSCM)remove FILESYSTYPE TYPE(DFSC) from BPXPRMxxRecommendation: migrate to NFS© GAD 2011Chart Nr.: 9

Migration Withdrawns/ReplacementsIEASYSxxCON= default change from SHARED to DISTRIBUTEDvalidate with: D OPDATA,MODECONSOLxx update for MFAnew MSGFLD parameter moved to CONSOLxxhandle messages much earlier during IPL (e.g. for Basic Hyperswap,GDPS)CONSOLxx sample:INIT … MSGFLD(00,(ON)) …zFS parameter ‘aggrgrow’ in IOEPRMxx uses newdefault: ON© GAD 2011Chart Nr.: 10

Migration© GAD 2011 planned to be withdrawn (> z/OS 1.13)SNMPzFSmigrate to BCPii (R13 last release)multi-file system aggregates (R13 last release)USSLECSChart Nr.: 11including cloning supportsee HealthChecker ZOSMIGVR11_ZFS_RM_MULTIFSBPX.DEFAULT.USER is planned to be removed, useBPX.UNIQUE.USER insteadremove runtime options USERMOD, use CEEPRMxx instead Bind 9.2.0

New Functions Installation Migration New Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 12

New Functions BCPIEASYSxx WARNUND (warn on undefined parameter)IEA660I when undefined statements in IEASYSxxinstead of replying WTOR IEA101A during IPLdepends on the placement of WARNUND in IEASYSxxCONSOLxx set a blank after major keywordsINIT, DEFAULT, HARDCOPY or CONSOLENote: an ‘invalid‘ syntax can lead to SYSCONS only© GAD 2011Chart Nr.: 13

New Functions BCPLLAnew START parameter LLA=NONE< R13: 1) S LLA,LLA=xx2) STOP / START LLA w/o LLA=xx -> “no parmlib member”, LNKLST only state> R13: 1) S LLA,LLA=xx2a) STOP / START LLA w/o LLA=xx -> same as before STOP LLA2b) STOP / START LLA,LLA=NONE -> “no parmlib member” LNKLST only statenew PFA checksPFA_JES_SPOOL_USAGEPFA_ENQUEUE_REQUEST_RATEadjust your BPXPMxx MAXFILEPROC statement if necessaryshould be > 5000 (# of open files increases)use JCL sample job in SYS1.SAMPLIB(AIRINJCL)to execute script /usr/lpp/bcp/AIRSHREP.sh with parameter ‘migrate‘ or ‘new’within the appropriate /pfa directory© GAD 2011Chart Nr.: 14

New Functions BCPGRSnew AUTHQLVL parameter in GRSCNFxxthe default level is AUTHQLVL=1new authorized qnames: ARCDSN, ARCBTAPE, ARCGPA,ARCBACV, and ARCMIGVmigrate to AUTHQLVL=2: IPL only!fallback possible with: SETGRS AUTHQLVL=1check for unauthorized (ISV) PGM abends S338, resp. S330CMDS FORCECMDS FORCE specification overrides the non-abendableattribute© GAD 2011Chart Nr.: 15

New Functions BCPenhanced Channel Recoverydynamic/automatic channel path removementnew messages for path-related errors with detailed informationabout the failing component (along with IOS050I and IOS051I)IOS210I, and IOS054IIECIOSxx Parmlib RECOVERY PATH_SCOPE={CU|DEVICE} default: DEVICE,PATH_INTERVAL=nn default: 10,PATH_THRESHOLD=nnn default: 10SETIOS commandSETIOS RECOVERY,PATH_SCOPE=CU,PATH_INTERVAL=nn default: 10,PATH_THRESHOLD=nnn default: 10PATH_INTERVAL and PATH_THRESHOLD only valid with PATH_SCOPE=CU© GAD 2011Chart Nr.: 16

New Functions BCP... enhanced Channel Recoverynew system message after the system will attempt to vary the path offline for all devices in thecontrol unit:IOS210I PATH RECOVERY INITIATED FOR PATH pp ON CU cccc, REASON=rsntxtProactively Removing Paths – Path Error Thresholding:IOS050I CHANNEL DETECTED ERROR ON dddd,yy,op,stat,PCHID=ppppIOS210I PATH RECOVERY INITIATED FOR PATH pp ON CU ccccREASON=PATH ERROR THRESHOLD REACHED© GAD 2011Proactively Removing Paths - Flapping Links:IOS001E dddd,INOPERATIVE PATHS pp pp ppIOS2001I dddd,INOPERATIVE PATHSSTATUS FOR PATH(S) pp,pp,pp,…LOGICAL PATH IS REMOVED OR NOT ESTABLISHED (A0)LINK RECOVERY THRESHOLD EXCEEDED FOR LOGICAL PATH (06)IOS210I PATH RECOVERY INITIATED FOR PATH pp ON CU ccccREASON=LINK THRESHOLD EXCEEDEDChart Nr.: 17

New Functions BCP... enhanced Channel Recoverynew message IOS054I is displayed along with IOS050I, IOS1050I, and IOS051Ipath error messages:IOS054I ddddd,pp,ERRORS DETECTED BY comp, comp,where ‚comp‘ is one of the following:CHANNEL, CHAN SWITCH PORT, CU SWITCH PORT, CONTROL UNITenhanced display commandD M=DEV(dddd,(chp))IEE174I ...[PATH OFFLINE DUE TO THE FOLLOWING REASON(S)][PATH RECOVERY ERROR][BY OPERATOR][CONTROL UNIT INITIATED RECOVERY][CONFIGURATION MANAGER]© GAD 2011Chart Nr.: 18

New Functions BCP© GAD 2011Logger Monitornew parmlib member for log stream offload data setallocation and recall monitorChart Nr.: 19IXGCNFxx PARMLIB memberMONITOR OFFLOADWARNALLOC(seconds)WARNRECALL(seconds)ACTIONALLOC(seconds)ACTIONRECALL(seconds)default: 30sec before IXG310Idefault: 60sec before IXG310Idefault. 60sec before IXG311Idefault: 120sec before IXG312I (WTOR)CTRACE(parmlib_member_name) (CTILOG00 default parmlib member)SETLOGR commandSETLOGR MONITOR,OFFLOAD,..SETLOGR CTRACE(CTnLOGxx),.. instead of using TRACE commandrelated commandsSET IXGCNF=xx,D LOGGER,IXGCNF

New Functions BCPMFA # of SPECIFIC messages increased from 50 to 1024Basic Hyperswap and GDPS already uses 35 messages by default# of ASIDs to be tracked and acted on simultaneously increasedfrom 10 to 128track address spaces by both jobname and ASIDusing symbolics allows handling of instances of the same programflooding in multiple ASIDs # of REGULAR and ACTION JOB statements increased from 10 to 64use more unique policies for more jobs© GAD 2011Chart Nr.: 20

New Functions BCPMFAenhanced D MF,STATUS commanddetermine if a message flood is underwaydisplays jobname and ASID of the program causing the flood,how long the flood has been underwayenhanced D MF,MSGRATE commandmore quickly, more precisely, and more restrictedenhanced DEFAULTCMD statement in MSGFLDxxDEFAULTCMD 'jobchar[asidchar],command-textsample statement:DEFAULTCMD '&%,CANCEL &,A=%'cancels a job by jobname and ASID© GAD 2011Chart Nr.: 21

New Functions BCPHZR (RTD Real Time Diagnostic)start HZR with SUB=MSTR (IEACMDxx)use new HZR procedure (SYS1.IBM.PROCLIB, PGM=HZRINIT andnot HZRIMAIN)use MODIFY HZR,ANALYZE for analysisPFA will now use RTD automatically for the following checksPFA_ENQUEUE_REQUEST_RATEPFA_MESSAGE_ARRIVAL_RATEPFA_SMF_ARRIVAL_RATE© GAD 2011Chart Nr.: 22

New Functions BCPIPCS DOCPU commanddisplays CPU related dataonly for SADUMPsSyntax: DOCPU[ ( CPU ( cpu-address-range-list ) ) |CPUTYPE ((ZAAP|ZA) | (ZIIP|ZI) | (STANDARD | CP | S) ) |CPUMASK ( cpumask ) ]EXEC ((ipcs-subcommand))Sample :IPCS DOCPU CPU(0,1) EXEC((ipcs_command))© GAD 2011Chart Nr.: 23

New Functions BCP CSVDLPAU (as a reminder ;-) ) already introduced with OA34525 (since z/OS 1.11)a new diagnostic message to CSVDLPAU was added:CSVD002W CSVINFO WAS NOT SUCCESSFUL. RC=xx, RSN=yyyyyyyy//... JOB ...//* PARM MEANING//* D DISPLAY ONLY THE DYNAMIC LPA MODULES (THIS IS THE DEFAULT)//* A DISPLAY DYNAMIC LPA AND ACTIVE LPA (E.G., MLPA AND FLPA//* AND DEVICE SUPPORT) MODULE//* SYSPRINT STATEMENT//* THIS DD DEFINES WHERE THE OUTPUT FROM THE PROGRAM IS SENT.//* OUTPUT COULD INSTEAD GO TO A SEQUENTIAL DATASET WITH ATTRIBUTES//* OF RECFM=FBA, LRECL=133, AND BLKSIZE=0.//* RETURN CODES//* WHEN CSVDLPAU ENDS, ONE OF THE FOLLOWING RETURN CODES IS PLACED//* IN GENERAL PURPOSE REGISTER 15://* CODE MEANING//* 0 SUCCESSFUL COMPLETION//* 4 BAD INPUT PARAMETER OR COULD NOT OPEN SYSPRINT DD//* 8 UNEXPECTED ERROR FROM THE CSVINFO SERVICE//LISTLPA EXEC PGM=CSVDLPAU,PARM=A//SYSPRINT DD SYSOUT=*© GAD 2011Chart Nr.: 24

New Functions© GAD 2011 JES2SPOOL enhancements (not tested yet!) MAS must be on R13!unique SPOOL data set name (DSNAME) per volumegeneric spool volume prefixChart Nr.: 25e.g. use SPOOLDEF VOLUME=SPOOL* genericspool volume extent function for dynamically resized volumese.g. use $TSPL,SPACE={MAX|(CYL,xx)|(TRK,xx)}spool volume migration functionAttention: check for ISV programs using SPOOL directaccess!JOB card parameter JOBRC JOBRC=(MAXRC|LASTRC) default: MAXRCsample: // JOB ... JOBRC=LASTRC

New Functions JES2JCL Instream data sets in PROCsDD DATA or DD * JCL within PROCs or INCLUDEsare supported in catalog and instream proceduresfour-digit return codesample:$HASP165 JAGTEST ENDED AT GNO50NJE MAXCC=0000 CN(INTERNAL)© GAD 2011Chart Nr.: 26

New Functions USSenhanced D OMVS,W display commandnew “FILE LATCH ACTIVITY“ sectionincluding DEVNO, INO, LSET, TYPE, FILE, FILE SYSTEMinformationfiltering options:D OMVS,W,L,O – display only the latch and other waiters tablesD OMVS,W,A – display any activity in any of the tables with wait time > 5 minutesD OMVS,W,L,A – display only activity in the latch tables with wait time > 5 minutesD OMVS,W,S – display any waiters in all tables and allow other waiters table to alsoinclude waiters on character special files, sockets and pipesD OMVS,W,O,S – display only waiters in the other waiters table and also include waiterson character special files, sockets and pipes© GAD 2011Chart Nr.: 27

New Functions USSnon-priviliged user mount supportSetup:© GAD 2011 Chart Nr.: 28define RACF profileSUPERUSER.FILESYS.USERMOUNT with UACC(READ)define new BPXPRMxx parameter:MAXUSERMOUNTSYSmaximum # of nonprivileged user mounts in the systemMAXUSERMOUNTUSERmaximum # of nonprivileged user mounts allowed for anynonprivileged user in the systemempty mount point requiredcheck for non-empty mountpointnew BPXPRMxx PARMLIB statementNONEMPTYMOUNTPT(NOWARN|WARN|DENY)

New Functions USS… non-priviliged user mount supportrelated commands: D OMVS,O and D OMVS,Lto display MAXUSERMOUNTSYS and MAXUSERMOUNTUSERD OMVS,F,UID=PRIV|USER|uidto display information for the file system mounted by the specific userD OMVS,USERMOUNTSto display summary information for the nonprivileged user mountsF BPXOINIT,FILESYS=D,GLOBAL|FILESYSTEM=|ALLto display current sysplex settings and mounted file system information:...MAXUSERMOUNTSYS= 0 HIWATER MAXUSERMOUNTSYS= 0MAXUSERMOUNTUSER= 0 HIWATER MAXUSERMOUNTUSR= 0...additional updates inISHELL File System mount table and file system attributes panelsdf -v OMVS shell command update to display user ID and EUID© GAD 2011Chart Nr.: 29

New Functions USSnew shell command: “script”makes a typescript of everything displayed on the terminalscript [-aq] [file]‘a’ option: appends the typescript to the file (default is to overwrite).‘q’ option: Quiet mode. In quiet mode, all diagnostic messages aresuppressed.file: default file name is ./typescriptuse ‘exit’ to end script© GAD 2011Chart Nr.: 30

New Functions DFSMShsmNon-intrusive Journal Backupquiesced journal backup (‘old’):all DFSMShsm activity is quiesced while the journal and the CDSs are backed upnon-intrusive journal backup (‘new‘):a point-in-time backup of the journal is created.the CDSs are backed up using CCall DFSMShsm activity is quiesced ONLY while changes to the journal are appended tothe journal backup copy and while CC sessions are established for CDS backup.automatically changed from ‘quiesced’ to ‘non-intrusive’ ifSETSYS JOURNAL(RECOVERY)SETSYS CDSVERSIONBACKUP(DATAMOVER(DSS)) using CCMCDS, BCDS, and OCDS are SMS-managedeach CDS's SMS MC: BACKUP COPY TECHNIQUE other than STANDARDcheck for ARC0750I message for backup technique:ARC0750I BACKUP FOR JRNL STARTING AT 12:27:16, ONARC0750I (CONT.) 2011/09/21, BACKUP TECHNIQUE IS NON-INTRUSIVE© GAD 2011Chart Nr.: 31

New Functions DFSMShsmARCCAT ENQ releaseall HSM functions release the ARCCAT resource when CDS Backupstartsuses XCF servicesOn Demand Migration using new SMS ENF72 eventsENF72 occur when a (SMS) volume threshold is exceeded during allocationSMSplex widenew SETSYS parametersONDEMANDMIGRATION(Y|N)specifies whether ODM should be used instead of interval migration onSMS-managed volumes that have AM=Y specified.ODMNOTIFICATIONLIMIT(limit)specifies a notification limit for the # of volumes of ALL SGs with AM=Ybeing processed© GAD 2011Chart Nr.: 32

New Functions DFSMShsmSMS configuration change refresh due to ENF15 eventsRecommendation: remove PATCH .MCVT.+C8 BITS(1.......)if there's no change in SMS SG and no new vols added since the lastPSM or ‘interval run’ the PATCH refresh of the SMS MVT chain is notneccessary anymoreworking with DFSMSdss cross-memory APIRecommendation: remove PATCH .MCVT.433 (for en-/disableDFSMSdss XM API)use SETSYS DSSXMMODE(Y|N) instead© GAD 2011Chart Nr.: 33

New Functions© GAD 2011 DFSMShsmRELEASE RECALL(DASD)RECALL requests from ML1 are still allowedRELEASE RECALL(DASD) internally changed a HOLD RECALL toHOLD RECALL(TAPE)QUERY CRQ (Common Recall Queue)Chart Nr.: 34QUERY COMMONQUEUE(RECALL) contains the host-id to make iteasier to find/cancel a requestARCCMDxx ONLYIFONLYIF HSMHOST(1,2,4) BEGINSETSYS ...SETSYS ...ENDmultiple hosts are allowed for HSMHOSTyou are able to define a command group

New Functions DFSMSdfpSMSsuppress DELETE/RENAME messages from hardcopy log and joblogset IGDSMSxx PARMLIBSUPPRESS_DRMSGS(Y|N)use SETSMS SUPPRESS_DRMSGS commandcheck for message:IGD17054I DATA SET NOT FOUND FOR DELETE/RENAME ON VOLUME volser DATA SET IS dsnameRETPD>9999old max of 27 yearsnew max of 93000 days (254 years) JCL DD keyword – REPTD= nnnnn (0 – 93000) new IDCAMS DEFINE CLUSTER keyword – FOR(days) (0-93000) (max. Date a data set can be retained is end of 2155)© GAD 2011Chart Nr.: 35

New Functions© GAD 2011 DFSMSdfpnew IGGCATxx PARMLIB member VVDSSPACE(prim,sec) default: 10,10 tracks TASKMAX(n) default: 180 NOTIFYEXTENT(n) default: 80%supported by MODIFY CATALOG command DELFORCEWNG(YES|NO) warning after DEL VVDS RECOVERY,resp. DEL USERCATALOG FORCE DSNCHECK(YES|NO) DSN syntax check SYMREC(YES|NO) creating a SYMREC UPDTFAIL(YES|NO) issue message IEC360I when aVSAM update against a catalog fails VVRCHECK(YES|NO) VVR checking on VVDS I/O DELERECOVWNG(YES|NO) warning after DELETE UCAT RECOVERY EXTENDEDALIAS(YES|NO) cretaing extensions records for ucataliasesChart Nr.: 36

New Functions DFSMSdfprelieve CATALOG ALIAS constraints by using EXTENDEDALIAS 1.13Maximum of approx. 3500 aliases / UCAT (for 32KB max record size)each UCAT connector is a CAT entrynew extension of record type ‘V’ for UCAT connectorsmax of 255 allows a limit of >500.000 aliases per UCAT(currently) setup only per command:PDSEF CATALOG,DISABLE|ENABLE(EXTENDEDALIAS)new PDSE validation utility: PGM=IEBPDSEnew commandsD SMS,PDSE,CONNECTIONS,DSN(pdsename)V SMS,PDSE,REFRESH,DSN(pdsename)© GAD 2011Chart Nr.: 37

New Functions DFSMSdfpIEBCOPY APF removal1.13 IEBCOPY no longer need to be APF authorizedpre 1.13 module IEBCOPY is saved in IEBCOPYO in SYS1.LINKLIBIEBDSCPY is now an alias for IEBCOPYOcheck for jobs running with ALIAS IEBDSCOPYmaybe the ALIAS will be deleted in a future release!© GAD 2011Chart Nr.: 38

New Functions DFSMSdfpnew VVDS limit for Primary or Secondary allocation5825 cylinders or 87375 tracks(The previous limit releases

New Functions zFSdirect I/Odirectly read and write zFS data from any system in a sysplexRequired: IOEPRMxx: sysplex=filesys (a shared files systemenvironment)don’t care about system ownership Significant performance enhancements !!60% performance improvement at GAD© GAD 2011Chart Nr.: 40

New Functions zFSinternal restartrecover from internal failures w/o losing mounts (i.e. internally remountsthe file systems)improved recovery timeuse command F ZFS,QUERY,STATUS to display restart counterIOEZ00736I zFS kernel initiated at Sep 22 13:59:14 2011Current status: activeInternal restart count 0MODIFY ZFS,HANGBREAK command changestill valid but now does a MODIFY ZFS,ABORT(zFS restart, DUMP, ... )© GAD 2011Chart Nr.: 41

New Functions zFSadjust DASD space requirementsstores data (

New Functions zFSIOEPRM xx configuration parameter changes (optional)‘dir_cache_size’ is not needed any longer and will be ignored‘client_cache_size’ default changed from 128M to 32M(only needed for

New Functions Health CheckerSYNCVAL parameter changes (of POLICY statement)Old:SYNCVAL(SYSTEM) is the default, checks starts, when added ,orwhen being activatedGiven INTERVAL starts at the time a ‘check run’ finishesNew:SYNCVAL(hh:mm) let's the check run for the first time at thespecified time of day (or the next day's, if that time has alreadypassed)It also gives a synchronization point for consecutive check runtimes, in conjunction with the check's INTERVALFor example: A check with SYNCVAL(20:00) andINTERVAL(12:00) will start at 8PM for the first time and will bescheduled to run at 8AM and 8PM on any following day© GAD 2011Chart Nr.: 44

New Functions Health CheckerAllocation (IBMALLOC):ALLOC_ALLC_OFFLN_POLICYALLOC_SPEC_WAIT_POLICYALLOC_TIOT_SIZECS (IBMCS)CSRES_AUTOQ_GLOBALTCPIPDATACSRES_AUTOQ_RESOLVEVIACSRES_AUTOQ_TIMEOUT CSVTAM_VIT_SIZE* n/a for R13+ anymore CSVTAM_DSPSIZE* n/a for R13+ anymore© GAD 2011Chart Nr.: 45

New Functions Health CheckerConsoles (IBMCNZ)CNZ_Console_Operating_ModeZOSMIGV1R13_CNZ_Cons_Oper_ModeDevice Manager (IBMDMO)DMO_TAPE_LIBRARY_INIT_ERRORSSupervisor (IBMSUP)SUP_HiperDispatchCPUConfigzFS (IBMZFS)ZOSMIGV1R13_ZFS_FILESYS© GAD 2011Chart Nr.: 46

New Functions Health CheckerVSAM RLS (IBMVSAMRLS)VSAMRLS_QUIESCE_STATUSUSS (IBMUSS) updatedUSS_PARMLIBnew settingsMAXUSERMOUNTSYSMAXUSERMOUNTUSERNONEMPTYMOUNTPTLOSTMSGXCF (IBMXCF update with OA34339)XCF_SFM_CFSTRHANGTIMEdefault increases from 300 to 900 seconds© GAD 2011Chart Nr.: 47

New Functions othersz/OSMF new pluginsCPRISPFSMS - DASD ManagerAvail. 1Q 2012 enabling APAR PM40869Software Deployment Manager© GAD 2011Chart Nr.: 48

New Functions … some other new functions … (Summary)RMM changes in panels, REXX, commands,...DFSMShsm FastreplicationDFSMSdfp DCBE macro VSCRset NON_VSAM_XTIOT to YES or NO in DEVSUPxx PARMLIB member (for ‘SUBSYS=‘ DCBs ; checkfor ISV programs)move IGGPRE00 and IGGPOST0 (if used) to PROGxxuse PROGxxEXIT ADD EXITNAME(IGGPRE00_EXIT) MODNAME(IGGPRE01)EXIT ADD EXITNAME(IGGPOST0_EXIT) MODNAME(IGGPOST5)using command SETPROG ADD, DELETE or REPLACE is also validdynamically replaceable (w/o IPL) and multiple exits are supported.all DADSM functions (create, extend, rename, partial release, and scratch) are supportedCS and TCPIPIFASMFDLHCDenhanced ARCHIVE/DELETE supportenhanced SMARTENDPOINT/SMARTEPOVER for ARCHIVE/DELETEUNICODE© GAD 2011Chart Nr.: 49

New Functions … some other new functions … (Summary)Communication ServerITDS (LDAP)RACFKerberosRRSF TCPIP supportUSS sudoLE and Metal CCL C/C++CPM/CPRSMB Win7 supportISPF DSLIST AL (Allocate Like) commandSDSFenhanced D GRS,ANALYZE, D GRS,C (Latch Identity support) commandRRSF over TCPIPInfoprint and new Infoprint Xforms…© GAD 2011Chart Nr.: 50

New Functions … some other new functions … (for R12 and R13)APARs OA35973 (RACF) and OA35974 (SAF) provide RACFsupport for administering access control to zSeries File Systems.This is accomplished by adding a new optionally enforced accesscontrol check that validates a user's authority to the access filesystem using a RACF general resource class profile.The details on this enhancement are in the online version of theRACF publication which can be found at:ftp://public.dhe.ibm.com/eserver/zseries/zos/racf/pdf/ oa35973.pdfSETROPTS GENERIC(FSACCESS)RDEFINE FSACCESS OMVS.ZFS.WEBSRV.** UACC(NONE)PERMIT OMVS.ZFS.WEBSRV.TOOLS CLASS(FSACCESS) ID(GROUPB USER19)ACCESS(UPDATE)SETROPTS CLASSACT(FSACCESS) RACLIST(FSACCESS)© GAD 2011Chart Nr.: 51

Toleration / Support Installation Migration New Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 52

Toleration / Support Toleration /SupportSMS RETPD>9999OA33019, OA33021, OA33022, OA33023, OA33024, OA33025, OA33028IGGCATxx PARMLIB member:prior releases: for Catalog: OA33517 for IDCAMS: OA34486 DFSMSdfp greater VVDS size OA34940Look for pre-R13 APARs for the following checks (IBMCNZ, ZOSMIGV1R13_CNZ_Cons_Oper_Mode) OA32930 (IBMZFS, ZOSMIGV1R13_ZFS_FILESYS) OA35465 (IBMSUP, SUP_HiperDispatchCPUConfig) OA35059 (IBMXCF, XCF_SFM_CFSTRHANGTIME) OA34439 (IBMVSAMRLS, VSAMRLS_QUIESCE_STATUS) OA28483 IEASYSxx WARNUND rollback to 1.12 OA35929 Console (incl. MSGFLD for MFA) rollback R11 OA33652JES2 generic SPOOL PREFIX OA31806DFSMShsm non-intrusive JOURNAL backup OA32993© GAD 2011Chart Nr.: 53

Problems Installation Migration New Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 54

Problems Triangle System IOF V8D1 support for z/OS 1.13:Fixe U8D2473 U8D2484 Compuware Support for z/OS 1.13 for AbendAID Version 12.1:PTFs V56580W, V59660W for AbendAID ViewerPTFs T46013Y, T59660Y for AbendAID© GAD 2011Chart Nr.: 55

Problems cont. CAnew OPEN CA-Disk SVC zapsCA Detector for DB2 for z/OS – MVS V15(XMANAGER)S0C4 in PDTDINCCPTF RO34315 (a showstopper at GAD for several weeks ☹ !!)S0C4 in DT$DIIPTF RO33712© GAD 2011Chart Nr.: 56

Problems cont.© GAD 2011 IBMABEND S0C4 in IFG0555HAPAR OA36474 / UA61253ABEND S0C4 in EDGQMGR in RMMChart Nr.: 57open; APAR Fix BA37302msg IEW2712S after USER-dump processingPMR openABEND S0C4 in IBMPOIOA LE environmentAPAR PM39642 / UK71232(no 1.13 problem; PTF available for all releases)ABEND S0C4 in IFG019TR using IFGOCETR(OPEN/CLOSE/EOV trace)PMR still open

Information Installation Migration New Functions Toleration / Support Problems Information© GAD 2011Chart Nr.: 58

Informationz/OS Migration Version 1 Release 13 GA22-7499-19 z/OS Planning for Installation GA22-7504-25z/OS Summary of Message and Interface ChangesSA22-7505-17z/OS Introduction and Release Guide GA22-7502-19ITSO Redbooks:z/OS 1.13 Implementation (planned)z/OS Management Facility(based on z/OS V1.12)SG24-xxxx-xxSG24-7851-00 zFS REORG Tool Redpaper REDP-4769-00© GAD 2011Chart Nr.: 59

BackupBACKUP© GAD 2011Chart Nr.: 60

New Functions USS/usr/sbin/[un]mount enhancements for zFS file systemsmount< 1.13 -o option was ignored for zFS; -t option specifies the FS type>1.13 -o is not ignored:1) if you want to keep it with us the -t option as before2) if file system is zFS the -o fsoptions MUST be validunmountotherwise mount doesn’t fail but the results might be unpredictable!=1.13 only mount point is valid for the pathname© GAD 2011Chart Nr.: 61