Fujifilm Sericol Flushing and Cleaning Solution QU016

FUJIFILM SERICOL SOLVENT FLUSHING SOLUTION QU016Hazard Alert Code: MODERATEChemwatch Material Safety Data SheetIssue Date: 6-Aug-2010 CHEMWATCH 4988-35XC9317SCVersion No:3CD 2010/3 Page 4 of 6Section 7 - HANDLING AND STORAGE• No smoking, naked lights or ignition sources.• Store in a cool, dry, well-ventilated area.Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTIONEXPOSURE CONTROLSSource Material TWA ppm TWA mg/m³ STEL ppm STEL mg/m³ Notes___________ ___________ _______ _______ _______ _______ _______Australia Exposure ethylene glycol 20 133 50 333 SkStandardsmonobutyl ether acetate(2- Butoxyethylacetate)PERSONAL PROTECTIONRESPIRATORType A Filter of sufficient capacityEYE• Safety glasses with side shields.• Chemical goggles.• Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing thewearing of lens or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption andadsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in theirremoval and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contactlens as soon as practicable. Lens should be removed at the first signs of eye redness or irritation - lens should be removed in a clean environmentonly after workers have washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].HANDS/FEET• Wear chemical protective gloves, eg. PVC.• Wear safety footwear or safety gumboots, eg. Rubber.OTHER• Overalls.• P.V.C. apron.• Barrier cream.• Skin cleansing cream.ENGINEERING CONTROLS■ Local exhaust ventilation usually required. If risk of overexposure exists, wear approved respirator.Section 9 - PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCEColourless liquid with a pleasant ester-like odour; mixes with water and commonorganic solvents.PHYSICAL PROPERTIESLiquid.Mixes with water.State Liquid Molecular Weight Not ApplicableMelting Range (°C) - 63 Viscosity Not AvailableBoiling Range (°C) 192 Solubility in water (g/L) MiscibleFlash Point (°C) 74 pH (1% solution) Not AvailableDecomposition Temp (°C) Not Available pH (as supplied) Not ApplicableAutoignition Temp (°C) 340 Vapour Pressure (kPa) Very LowUpper Explosive Limit (%) 8.5 (135C) Specific Gravity (water=1) 0.942Lower Explosive Limit (%) 0.5 (135C) Relative Vapour Density 5.5(air=1)continued...