Fujifilm Sericol Flushing and Cleaning Solution QU016

FUJIFILM SERICOL SOLVENT FLUSHING SOLUTION QU016Hazard Alert Code: MODERATEChemwatch Material Safety Data SheetIssue Date: 6-Aug-2010 CHEMWATCH 4988-35XC9317SCVersion No:3CD 2010/3 Page 5 of 6Section 9 - PHYSICAL AND CHEMICAL PROPERTIESVolatile Component (%vol) 100 Evaporation Rate 0.3 BuAC = 1Section 10 - CHEMICAL STABILITYCONDITIONS CONTRIBUTING TO INSTABILITY• Presence of incompatible materials.• Product is considered stable.• Hazardous polymerisation will not occur.For incompatible materials - refer to Section 7 - Handling and Storage.Section 11 - TOXICOLOGICAL INFORMATIONPOTENTIAL HEALTH EFFECTSACUTE HEALTH EFFECTS■ HARMFUL- May cause lung damage if swallowed.■ Harmful by inhalation and in contact withskin.■ Ingestion may produce health damage*.■ May produce discomfort of the eyes andskin*.■ * (limited evidence).CHRONIC HEALTH EFFECTS■ May possibly affect fertility*.■ Cumulative effects may result followingexposure*.■ * (limited evidence).TOXICITY AND IRRITATION■ Not available. Refer to individual constituents.Section 12 - ECOLOGICAL INFORMATIONNo dataEcotoxicityIngredient Persistence: Persistence: Air Bioaccumulation MobilityWater/Soilethylene glycol monobutyl ether LOW LOW HIGHacetateSection 13 - DISPOSAL CONSIDERATIONS• Containers may still present a chemical hazard/ danger when empty.• Return to supplier for reuse/ recycling if possible.Otherwise:• If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the sameproduct, then puncture containers, to prevent re-use, and bury at an authorised landfill.• Where possible retain label warnings and MSDS and observe all notices pertaining to the product.Section 14 - TRANSPORTATION INFORMATIONLabels Required: COMBUSTIBLE LIQUID, regulated under AS1940 for Bulk Storage purposes only.HAZCHEM:None (ADG7)continued...