Ocean Cot-Bed instructions - Mamas & Papas

More documents

Recommendations

Info

STEP 5Slot the drawer front (6)onto the drawer sides,centre rail and drawerbases, see diagram.Align the cam studs inthe drawer front withthe connecting holes inthe drawer sides andcentre rail. Ensure thatthe drawer bases slot intothe recesses in the drawerfront.Secure the drawer front inposition by tightening thefour cams in the drawersides. Lock the cams byturning them clockwisewith the thick end of theallen key (J).6JSTEP 6Turn the assembleddrawer upside down andslot two cams (A) intothe large holes in thecentre rail (4). Ensure thearrows on the cam headsare pointing towards theconnecting holes in thefront edge of the centrerail.Lock the cams by turningthem clockwise using thethick end of the allen key(J).JA4--
STEP 7Slot the back rail (10)onto the head end (7) asshown.Fasten the back rail to thehead end by slotting oneof the rail inserts (H) intothe hole in the rail.Push one of the shortbolts (D) through the holein the rail insert and backrail.Tighten the short boltinto the head end usingthe long end of the allenkey (J).Important: Only halftighten the bolts into thecot end.7H10DJSTEP 8Slot one of the cot sides(9) onto the head end asshown in the diagram.Fasten the cot side inplace by inserting twolong bolts (E) through theend rail of the cot side.Screw the bolts half wayinto the head end usingthe long end of the allenkey (J).IMPORTANT: Do not fullytighten the bolts of fastenthe cam in the bottomrail of the cot side untilthe remaining cot side hasbeen fitted.EJ9--
Page 2: Ocean cot-bedBefore assembling your
Page 5: STEP 3Slot the drawer bases (5)into
Page 9 and 10: JSTEP 11Tighten all of the fourlong
Page 11 and 12: STEP 15The cot is now fullyassemble
Page 13: JSTEP 19Fully tighten the four long

Ocean Cot-Bed instructions - Mamas & Papas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?