Service Manual - TOSHIBA TEC store

More documents

Recommendations

Info

2. MAJOR UNIT REPLACEMENT EO18-330242.5 Replacing the Drive PC Board2.6 Replacing the Drive PC Board1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PCBoard.)2) Remove the Stepping Motor. (Refer to Section 2.5 Replacing the Stepping Motor.)3) Remove the Screw from the Base Frame.4) Disconnect all Connectors and FPC Cable from the Drive PC Board.Drive PC BoardT-2x5 ScrewBase FrameNOTE: Before disconnecting the FPC Cable, release the Connector Lock.Connector LockFPC Cable5) Remove the Drive PC Board from the Guide.Head FPC CableDrive PC Board2-14
2. MAJOR UNIT REPLACEMENT EO18-330242.5 Replacing the Drive PC Board6) Replace the Drive PC Board with a new one, then reassemble in the reverse order of removal.2-15
Page 2 and 3: WARNING!Follow all manual instructi
Page 4: 1. UNPACKING EO18-330241.1 Procedur
Page 8 and 9: 2. MAJOR UNIT REPLACEMENT EO18-3302
Page 14: 2. MAJOR UNIT REPLACEMENT EO18-3302
Page 17: 2. MAJOR UNIT REPLACEMENT EO18-3302
Page 30: 3. TROUBLESHOOTING EO18-330243. TRO

Service Manual - TOSHIBA TEC store

Create successful ePaper yourself

Delete template?

Save as template?