AP 720S Instruction Manual - Hitachi Chemical Diagnostics

5 Preparation Prior to Operation5-1 Power Cord• Ensure the power switch is OFF(O) before inserting the power cord into theoutlet.• Connect the power cord into AC on the back side of the instrument.• The attached power cord is for use in USA/Canada only. For other regions,use an appropriate regional power cord. Failure to do so will result in severedamage to the instrument.5-2 Power ON• Switch the Power ON(I).• The instrument will automatically initialize after about ten seconds frompowering ON.Main Menu screen will appear . Continue with Preparation Instructions .Do not touch the Power Switch with wet hands, as it may cause electricshock.5-3 Pette Rack• Attach one Pette Tip onto each Pette Body.Pette BodyPette Tip• Collect the Pette Rack and Pette Stand. Always use the Pette Stand whenloading or removing the pettes.Pette RackPette Stand11