AP 720S Instruction Manual - Hitachi Chemical Diagnostics

More documents

Recommendations

Info

2-2 OverviewInstrument ComponentsItemDescription1. Pette Rack Maximum of twenty (20) Pettes can be loaded.2. Sample/ReagentRackSerum Cups (20) + Reagent Reservoirs (2) will be loadedmanually.Two reagent reservoirs are available:Antibody=identified by a blue fill linePhotoreagents=identified by a red fill line3. Nozzle Head Nozzle Head will connect to the top opening of thePettes during the Pette washing, sample and reagentaspiration.4. Sample/ReagentAspirationPettes will move into their specified positions for sampleand reagent aspiration.5. Pette Washing The Pette Tip and the Pette Body will be washed. Wasteliquid will be drained through the vacuum pump.6. Nozzle HeadWashingNozzle Head will be washed with Wash Buffer andDeionized Water. Waste liquid will be drained throughthe vacuum pump.7. LCD Display A touch screen will operate the LCD display.Assay ComponentsNo. OPTIGEN Kit Components Quantity1 Pettes 202 Photoreagent AB 13 Photoreagent CD 14 IgE Antibody 15 Wash Buffer Concentrate 16 White Plugs 227 Black Plugs 22No. Consumables Quantity1 Pette Tips (per bag) 622 Sample Cups (per bag) 10005
2-3 Accessories1 2,3 4 56 7,8 9 1011 12,13No. Instrument Parts Quantity1 Power Cord* 12 Pette Rack 13 Pette Stand 14 Sample/Reagent Rack 15 Antibody Reagent Reservoir (blue) 15 Photoreagent Reservoir (red) 16 Water and Wash Buffer Tubes (Φ 3×Φ 5 silicon 1.5m) 27 Vacuum Tube (orange) (Φ 3×Φ 5 toaron 1.5m) 18 Drain Tube (black) (Φ 3×Φ 5 toaron 1.5m) 19 Water Bottle and Wash Buffer Bottle (1L) 210 Waste Bottle (2L) 111 Over Flow Tray 112 Gasket 113 O-Ring 114 AP 720S Instruction Manual 115 AP 720S LCD Panel Guide 116 AP 720S Quick Start 1* NOTE: The attached power cord is for use in USA/Canada only. For otherregions, use an appropriate regional power cord. Failure to do so will result insevere damage to the instrument. The Auto-Run time (Priming and Processes)for a maximum of twenty pettes is approximately 4 hours and 45 minutes.6
Page 1 and 2: AP 720S TMInstruction ManualOPTIGEN
Page 3 and 4: ― Table of Contents ―Page1 User
Page 5: 2 System OverviewThe AP 720S Semi-A
Page 9 and 10: 3-2 Back of Instrument (Power Panel
Page 11 and 12: 4-2 Tube Connections• Connect eac
Page 13 and 14: • Place the Pette Rack onto the P
Page 15 and 16: 5-4 Sample/Reagent Rack• Gather t
Page 17 and 18: 5-5 Loading the Racks/Reservoir ont
Page 19 and 20: 6 Operation6-1 Procedures for Opera
Page 21 and 22: • There are eight (8) processes i
Page 23 and 24: • Insert the black top plug into
Page 25 and 26: c. Press the “Next” key on the
Page 27: 8 TroubleshootingIf you experience

AP 720S Instruction Manual - Hitachi Chemical Diagnostics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?