AP 720S Instruction Manual - Hitachi Chemical Diagnostics

More documents

Recommendations

Info

• Fill the Antibody Reservoir with the correct amount of Antibody. Refer to thetable below. Gently invert Antibody Reagent Bottle prior to use to mix.PetteNo.Antibody(mL)PetteNo.1 1.6 11 7.62 2.2 12 8.23 2.8 13 8.84 3.4 14 9.45 4.0 15 10.06 4.6 16 10.67 5.2 17 11.28 5.8 18 11.89 6.4 19 12.410 7.0 20 13.0Antibody(mL)BLUE Line15
5-5 Loading the Racks/Reservoir onto the Instrument:• Setting of the Sample/Reagent Rack1. Install the Sample/Reagent Rack first, then insert the Pette Rack into theinstrument.2. Hold the Sample/Reagent Rack so that the position #1 aligns with thered indicator line (see photo below).3. Lower the Sample/Reagent Rack slowly so that the center and thePositioning Pin are aligned into the appropriate hole at the bottom of therack.4. Ensure that the Sample/Reagent Rack is secure and horizontal.5. Ensure the Antibody Reservoir has sufficient Antibody and load onto theSample/Reagent Rack.Sample/ReagentRackPositioning PinCenterSample/ReagentRackRed Indicator Line16
Page 1 and 2: AP 720S TMInstruction ManualOPTIGEN
Page 3 and 4: ― Table of Contents ―Page1 User
Page 5 and 6: 2 System OverviewThe AP 720S Semi-A
Page 7 and 8: 2-3 Accessories1 2,3 4 56 7,8 9 101
Page 9 and 10: 3-2 Back of Instrument (Power Panel
Page 11 and 12: 4-2 Tube Connections• Connect eac
Page 13 and 14: • Place the Pette Rack onto the P
Page 15: 5-4 Sample/Reagent Rack• Gather t
Page 19 and 20: 6 Operation6-1 Procedures for Opera
Page 21 and 22: • There are eight (8) processes i
Page 23 and 24: • Insert the black top plug into
Page 25 and 26: c. Press the “Next” key on the
Page 27: 8 TroubleshootingIf you experience

AP 720S Instruction Manual - Hitachi Chemical Diagnostics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?