AP 720S Instruction Manual - Hitachi Chemical Diagnostics

More documents

Recommendations

Info

• Load the Pettes with attached Pette Tips, one by one, into the cartridges onthe Pette Rack. Always start at position #1 and do not leave anypositions empty when loading.1. The black side of the Pette Body should face the Operator.2. Slide the bottom portion of the Pette Body through the bottom cartridgeopening so that the Pette Body extends past the bottom of the cartridgeplatform.Cartridge OpeningExtension of PetteBody Past CartridgePlatform3. Slide the top of the Pette Body under the upper portion of the cartridge,while pushing down on the Pette Body. Check that the Pette Body iscorrectly positioned and securely attached to the Pette Rack.Pette Body sliding intotop of cartridgeTop of Pette Body inPette Rack cartridgePette Body in positionin Pette Rack13
5-4 Sample/Reagent Rack• Gather the Serum Cups, Antibody Reagent Reservoir (BLUE line), and theSample/Reagent Rack.Sample/ReagentRackSample CupReagent Reservoirfor Antibody• Load the sample cups starting at position #1. Always start at position #1and do not leave any empty positions when loading.• Ensure the quantity of Sample Cups matches the quantity of Pette Bodies.• Use only HCD approved Sample Cups. Other cups may cause theinstrument to malfunction and test results may be lost.• Fill the correct amount of centrifuged serum into the Sample Cups:o 600 µl serum for a 36-allergen petteo 490 µl serum for a 20-allergen petteNOTE: There is a red Sample Fill Line on the Sample/Reagent Rack. Thisline can be used as a guide to check that there is a fill volume ofapproximately 600 µl in the Sample Cups.Sample/ReagentRackSample Fill Line14
Page 1 and 2: AP 720S TMInstruction ManualOPTIGEN
Page 3 and 4: ― Table of Contents ―Page1 User
Page 5 and 6: 2 System OverviewThe AP 720S Semi-A
Page 7 and 8: 2-3 Accessories1 2,3 4 56 7,8 9 101
Page 9 and 10: 3-2 Back of Instrument (Power Panel
Page 11 and 12: 4-2 Tube Connections• Connect eac
Page 13: • Place the Pette Rack onto the P
Page 17 and 18: 5-5 Loading the Racks/Reservoir ont
Page 19 and 20: 6 Operation6-1 Procedures for Opera
Page 21 and 22: • There are eight (8) processes i
Page 23 and 24: • Insert the black top plug into
Page 25 and 26: c. Press the “Next” key on the
Page 27: 8 TroubleshootingIf you experience

AP 720S Instruction Manual - Hitachi Chemical Diagnostics

Create successful ePaper yourself

Delete template?

Save as template?