26.11.2012 Views

T E C H N IC A LD A TA - UPgates

T E C H N IC A LD A TA - UPgates

T E C H N IC A LD A TA - UPgates

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

odstraňovač plísní<br />

›› Serial Number 1003<br />

special agent of disposal of mold, fungi and algae on the walls<br />

Features:<br />

SANATHERM odstraňovač plísní (SANATHERM mold remover) is<br />

a special liquidating agent highly e� ective against fungi, mold and algae<br />

which invade walls. SANATHERM odstraňovač plísní has a broad<br />

spectrum of activity including mold, fungi, algae, mosses and lichens.<br />

Usage:<br />

SANATHERM odstraňovač plísní is designed for disposal of biological<br />

attacks on masonry, roo� ng and other surfaces.<br />

Consumption:<br />

0.1–0.2 kg/m2<br />

Packaging:<br />

0.5 kg plastic bottle with spray, 5 kg plastic canister<br />

Storage:<br />

In the original, tightly closed containers at 5 to 25 °C, away from<br />

food, beverages and feed. Protect from frost, high temperatures and direct<br />

light.<br />

Surface preparation:<br />

Before applying SANATHERM odstraňovač plísní the area should<br />

be cleansed mechanically (preferably high-pressure washing) to get rid<br />

of large deposits of matter, and let to dry.<br />

Application:<br />

SANATHERM odstraňovač plísní is best applied by brush or roller<br />

(for topical application can also use spray) on a dry surface, which has<br />

had the largest deposits removed. It is necessary to saturate the a� ected<br />

surafce by the agent as much as possible, so that the e� ective substance<br />

penetrates as deep as possible and destroys thus the spawn of funghi<br />

and mold. Highly absorbent and rough surfaces should be given increased<br />

attention. The treated surface is recommended to be painted as<br />

soon as possible to provide coating resistant to mildew, fungi and algae,<br />

such as special silicone facade paint SANATHERM B silikon PREVEN-<br />

SIL in order to prevent new invasions of biological pests.<br />

Waste disposal:<br />

Included on the data sheet of the product.<br />

Safety and hygiene at work:<br />

SANATHERM odstraňovač plísní is not classi� ed as dangerous. It<br />

is necessary to use protective clothing, gloves and goggles.<br />

S 2 Keep out of reach of children.<br />

S 23 Do not breathe aerosols<br />

S 51 Use only in well-ventilated areas<br />

After contact with skin, immediately take o� all contaminated<br />

clothing and wash exposed skin with plenty of water. Eye contact, remove<br />

contact lenses, eye wash 10–15 minutes with plenty of water and<br />

›› ver. 02-12<br />

seek medical advice. If swallowed, rinse mouth with water and drink<br />

about 0.5 liter of water. Do not induce vomiting. When health problems<br />

after handling the product seek medical advice immediately and show<br />

this container.<br />

Use this product safely. Read the information on the pack<br />

and the enclosed product information sheet before use.<br />

›› 53

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!