T E C H N IC A LD A TA - UPgates

More documents

Recommendations

Info

lesk akrylátový Certifi cation: TZÚS Prague Authorized Person No. 204, Bratislava TSÚS Notifi ed Person No. 1301. Waste disposal: Included on the data sheet of the product. Safety and hygiene at work: When following basic hygiene rules ETERNAL lesk akrylátový is not a health hazard. It is necessary to use suitable protective clothing, gloves and goggles. Wash skin with soap and water, in case of contact with eyes, fl ush immediately with plenty of water. If irritation does not stop, seek medical advice. If accidentally swallowed seek medical advice. Do not induce vomiting. ›› 8
lesk alkydový ›› Serial Number 9906 water-based paint for interior and exterior coating of glossy wood and metal structures Features: ETERNAL lesk alkydový (ETERNAL alkyd gloss) is water-borne alkyd paint based on an aqueous emulsion of a hybrid resin, weatherstable pigments, fi llers and special additives. Paints dry to a perfect high gloss, a high hardness and good anti-blocking properties. Usage: ETERNAL lesk alkydový is used to fi nish wood, chipboard and plywood materials. It is particularly suitable for glossy coats windows and doors, even in environments such as those of manufacturing companies. ETERNAL lesk alkydový can also be used for surface treatment of metal substrates with anti-corrosion coating (e.g. ETERNAL antikor akrylátový or ETERNAL na kovy). Technical data: Dry matter min. 50 wt. % Spec. Weight 1.2–1.3 g/cm2 pH 7,5–9,5 Consistency (4 mm) min. 150 sec Opacity grade 1 to grade 2 Drying grade 1 80 min. (20°C) grade 5 12 - 20 hours (20°C) Gloss grade 1 Hardness: after 10 days 30 % Consumption: 0.12-0.15 kg/m2 (1 layer) Shades: RAL 9003 white Centre COLOR SYSTEM AUSTIS tones and shades according to swatches CSA Eurotrend, NCS - S, RAL, CSA Anorganic, Aquatec SF, BS 5252 F Coltec 90, Monicolor Nova, Spirit 03 etc. (choose from more than 8000 shades). Packaging: • 0.7 kg cans, 5 kg plastic containers • tinted in shades of CSA: 1 kg cans, 5 kg plastic containers Storage: Store (in the original unopened packaging) between 5–25°C. It must not freeze! Application: ETERNAL lesk alkydový is applied by brush, roller, pneumatic and airless high pressure spray, to clean, dry surfaces, free of grease and loose layers. ETERNAL lesk alkydový can be diluted to a suitable consistency of application up to 10 wt. % water. The temperature of the surface and the surroundings must be at least 10 °C, relative humidity should be no higher than 75%. Lower temperatures and higher relative humid- ›› ver. 01-11 ity lengthen drying time. It is necessary to protect the applied coat for a min. 48 hours against any precipitation and atmospheric moisture condensation. Tools should be washed with water immediately after usage. Examples of the use of paint ETERNAL lesk alkydový: Finish untreated wood: 1) Penetrating the surface by means of ETERNAL na dřevo napouštědlo with biocidal drying eff ects 8–20 hours (20-25°C) 2) Grinding with dry sandpaper No. 150. 3) 1–2 times coat with a base of ETERNAL na dřevo základní with an interval of 10-24 hours between coats (20–25°C) 4) Grind with dry sandpaper No. 150–180. 5) 1-2 times coat with ETERNAL lesk alkydový 1–2 times (from 0.12 to 0.18 kg / m2), drying 10-20 hours (20–25°C) Finishing already treated wood: 1) Sand with sandpaper No. 150–180. 2) 2 x coat of ETERNAL lesk alkydový. 2 x (0.12 to 0.18 kg / m2), drying 10-20 hours (20 - 25°C) Surface treatment metal base: 1) cleaning and degreasing of the surface (ETERNAL odmašťovač). 2) 2 x coat anti-corrosive paint ETERNAL antikor akrylátový or ETERNAL na kovy 2 x (0.12 to 0.16 kg / m2), 5 hours of drying (20 ° C). 3) 2 times coat with ETERNAL lesk alkydový 2-2 times (from 0.12 to 0.18 kg / m2), drying 10-20 hours (20-25°C). Certifi cation: TZÚS Prague Authorized Body No. 204, VVÚD Authorized Body No. 222 Waste disposal: Included on the data sheet of the product. Safety and hygiene at work: When following basic hygiene rules ETERNAL lesk alkydový is not a health hazard. It is necessary to use suitable protective clothing, gloves and goggles. Wash skin with soap and water. In the case of eye contact immediately fl ush with plenty of water and seek medical advice. If swallowed, rinse mouth with lukewarm water and drink about 0.5 liters of lukewarm water with 10 crushed charcoal tablets, seek medical advice. ›› 9
Page 1 and 2: AUSTIS Technical data
Page 3 and 4: mat akrylátový ›› Serial Numb
Page 5 and 6: mat Revital ›› Serial Number 05
Page 7: lesk akrylátový ›› Serial Num
Page 11 and 12: odmašťovač ›› Serial Number
Page 13 and 14: na radiátory ›› Serial Number
Page 15 and 16: na střechy ›› Serial Number 07
Page 17 and 18: na dřevo napouštědlo ›› Seri
Page 19 and 20: lazura tenkovrstvá ›› Serial N
Page 21 and 22: PUR lak ›› Serial Number 0104 o
Page 23 and 24: IN plus ›› Serial Number 9518 e
Page 25 and 26: IN Thermo ›› Serial Number 0917
Page 27 and 28: epoxy stabil ›› Serial Number 9
Page 29 and 30: op-izol ›› Serial Number 9404 w
Page 31 and 32: elast ›› Serial Number 9704 spe
Page 33 and 34: akrylát ›› Serial Number 9515
Page 35 and 36: silikon PREVENSIL ›› Serial Num
Page 37 and 38: ›› Serial Number 9402 waterproo
Page 39 and 40: ›› Serial Number 9710 waterproo
Page 41 and 42: ›› Serial Number 9510 Universal
Page 43 and 44: UNI ›› Serial Number 0202 one c
Page 45 and 46: 1K Warning: Insulation material mad
Page 47 and 48: (experimentally up to 10 wt.% liqui
Page 49 and 50: opravný beton ›› Serial Number
Page 51 and 52: adhezní můstek ›› Serial Numb
Page 53 and 54: PNO ›› Serial Number 9514 pigme
Page 55 and 56: flex ›› Serial Number 0918 flex
Page 57 and 58: akrylátová omítkovina ›› Ser
Page 59:
AUSTIS a.s. K Austisu 680 154 00 Pr
show all

T E C H N IC A LD A TA - UPgates

Create successful ePaper yourself

Delete template?

Save as template?