T E C H N IC A LD A TA - UPgates

More documents

Recommendations

Info

moisture penetration in the joints and various details, reliable protection against adverse eff ects causing degradation of the metal elements. SANAKRYL TOP can be applied on old paint stripped loose and peeling parts. Applications are made in one layer. Corroded spots are to be pretreated with anti-corrosive paint ETERNAL antikor akrylátový or paint ETERNAL na kovy. The surface should be dry, grease-free, dust-free, and then can be painted using SANAKRYL TOP with a brush or roller. Consumption: 0.5–1.0 kg/m2 General information: SANAKRYL TOP can be applied at ambient and surface temperature in the range of 8 °C to 30 °C. Detailed work fl ow application is processed in a separate regulation regarding the application on roofs. Companies intending to use this material are recommended to attend a in order to obtain the "Certifi cate of the manufacturer", where the company is trained for laying the material. Long-term guarantees are provided by the manufacturer only after completion of training. The acquired certifi cate also allows free use of advisory services and technical assessment of the state of objects in large investment projects. Certifi cation: TZÚS Prague Authorized Person No. 204 Waste disposal: Included on the data sheet of the product. Safety and hygiene at work: When following basic hygiene rules SANAKRYL TOP is not a health hazard. It is necessary to use suitable protective clothing, gloves and goggles. Wash skin with soap and water, in case of contact with eyes, fl ush immediately with plenty of water. If irritation does not stop, seek medical advice. If accidentally swallowed seek medical advice. Do not induce vomiting. ›› ver. 01-11 ›› 58
›› Serial Number 9510 Universal waterproof sealing compound for insulation and protection of building structures of concrete and steel Features: FORTISOL is a two component waterproofi ng sealing material with a moderate proportion of plasticity. It creates a seamless waterproofi ng layer with excellent adhesion to concrete. The hardened layer waterproof material is hardy, resistant to water pressure, even when the pressure is acting in the direction of the surface (ground water). FORTI- SOL can be applied to damp and not fully mature concrete. FORTISOL protects concrete structures against aggressive atmospheric infl uences. It prevents the penetration of CO2 and SO2 into concrete construction of underground tunnels and canals and water works. It also prevents the penetration of radon from the soil. Usage: FORTISOL is designed for outdoor and indoor insulation building materials, structures and foundations from ground waters in both new and old buildings. It also serves as protection of steel, concrete and reinforced concrete structures from water, moisture, atmospheric eff ects and corrosion. It can be also used as insulation under the tiles such as bathrooms, swimming pools, water tanks. It is also suitable to insulate tanks, septic tanks, sewers and underground tunnels, and water works and water pressure acting against the pressure in the direction of the substrate to 50 m below the ground water. On concrete surfaces, it can withstand constant exposure to water. (Not applicable to applications on metal surfaces). It is suitable as a bonding agent for additional placement of concrete to protect steel reinforcement from corrosion. Technical data: Mixing ratio: 3 wt. parts of comp. A : 1 wt. part of comp. B Mixing time: 5 minutes (mixer 300 rpm / min.) Processing time 60 minutes Working temperature 5°C to 30°C Spec. Weight min. 1.6 g /cm3 Frost resistance min. 25 cycles Water resistance 0.0 l/m2 per hour Surface adhesion 1.2 MPa (concrete, ceramic tiles) Tensile strength after 28 days min. 1.5 MPa Compressive strength Penetration of radon: min. 20 MPa at 1 mm penetration reaches half the 300,000 s Consumption: • 1.0 to 1.5 kg / m2 in non-pressure insulation facings (1 layer) • 2.0–3.0 kg/m2 with insulation up to 1m below ground level to ground moisture and water pressure (2-3 layers) • 4.0 to 6.0 kg / m2 with insulation from 1 m to 50 m below ground level to water pressure acting on the surface (3-4 layers) Shades: gray ›› ver. 01-11 Packaging: 20 kg (Component A - 15 kg loose, Component B - 5 kg liquid) Storage: Dry ingredient - in a dry place in tightly closed original containers at 5 °C to 30 °C. The liquid component - in original tightly closed containers at 5 °C to 25 °C. Do not freeze! Surface preparation: The surface must be as written below for FORTISOL: • smooth (tensile strength perpendicular to the surface at least 1.5 MPa.) • cleaned from loose particles and grease (ETERNAL odmašťovač concentrate solution or other suitable detergent) • repaired (repair spallings places, potholes, joints, etc.), Materials which are suitable for repairings - FORTE vyrovnávací hmota, FORTE opravný beton • damp, (not wet) or primed with FORTE penetral • highly polished surfaces are recommended to be rough (blasting, grinding) Repairing the surface: • Gaps and unevenness in the substrate must be repaired by FORTE vyrovnávací hmota, FORTE opravný beton, or cement mortar. The surface must allow for continuous application of coats. • water leaks must be stopped before the application of FORTISOL by convenient sealant. Following sealing, it is appropriate to ensure that these places are reinforced with fi berglass material pressed into FORTISOL. • The corners and edges of the walls must be reinforced with fi berglass cloth or use a fl exible sealing strip FORTE into the FOR- TISOL, connecting the fl oor to the wall with cement mortar fi llet (fabion) and reinforced with fi berglass or use a fl exible sealing strip FORTE. Application: Pour FORTISOL component B (liquid) into a clean container, while slowly stirring sprinkle FORTISOL component A (loose). The mixing ratio of components is 3 wt. parts of component A with 1 wt. part of B until the waterproofi ng material is perfectly mixed, preferably with an electric drill with a mixer to eliminate lumps and froth. (minimum 5 minutes). After this time the material should be left for 5 minutes and mixed again briefl y. Apply by brush, or stainless steel trowel to the prepared surface at least 4 hours after application of the primer. It is applied in layers no thicker than 1 mm, which corresponds to the consumption of 1.0 to 1.3 kg / m2. A break between each of the layers should be for 24 hours. During the curing, the waterproofi ng material must not come into contact with water. During the insulation work, it is necessary to prevent ejections of water using a convenient fast-hardening sealant and after the repaired spot has hardened, apply FORTISOL as described above. ›› 59
Page 1 and 2: AUSTIS Technical data
Page 3 and 4: mat akrylátový ›› Serial Numb
Page 5 and 6: mat Revital ›› Serial Number 05
Page 7 and 8: lesk akrylátový ›› Serial Num
Page 9 and 10: lesk alkydový ›› Serial Number
Page 11 and 12: odmašťovač ›› Serial Number
Page 13 and 14: na radiátory ›› Serial Number
Page 15 and 16: na střechy ›› Serial Number 07
Page 17 and 18: na dřevo napouštědlo ›› Seri
Page 19 and 20: lazura tenkovrstvá ›› Serial N
Page 21 and 22: PUR lak ›› Serial Number 0104 o
Page 23 and 24: IN plus ›› Serial Number 9518 e
Page 25 and 26: IN Thermo ›› Serial Number 0917
Page 27 and 28: epoxy stabil ›› Serial Number 9
Page 29 and 30: op-izol ›› Serial Number 9404 w
Page 31 and 32: elast ›› Serial Number 9704 spe
Page 33 and 34: akrylát ›› Serial Number 9515
Page 35 and 36: silikon PREVENSIL ›› Serial Num
Page 37 and 38: ›› Serial Number 9402 waterproo
Page 39: ›› Serial Number 9710 waterproo
Page 43 and 44: UNI ›› Serial Number 0202 one c
Page 45 and 46: 1K Warning: Insulation material mad
Page 47 and 48: (experimentally up to 10 wt.% liqui
Page 49 and 50: opravný beton ›› Serial Number
Page 51 and 52: adhezní můstek ›› Serial Numb
Page 53 and 54: PNO ›› Serial Number 9514 pigme
Page 55 and 56: flex ›› Serial Number 0918 flex
Page 57 and 58: akrylátová omítkovina ›› Ser
Page 59: AUSTIS a.s. K Austisu 680 154 00 Pr

T E C H N IC A LD A TA - UPgates

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?