Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuration<br />
D-<strong>Link</strong> DCS-2130 User Manual<br />
Network Setup<br />
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After<br />
making any changes, click the Save Settings button to save your changes.<br />
LAN Settings:<br />
DHCP:<br />
Static IP Address:<br />
IP Address:<br />
Subnet Mask:<br />
Default Gateway:<br />
Primary DNS:<br />
Secondary DNS:<br />
This section lets you configure settings for your local<br />
area network.<br />
Select this connection if you have a DHCP server<br />
running on your network and would like your camera<br />
to obtain an IP address automatically.<br />
You may obtain a static or fixed IP address and<br />
other network information from your network<br />
administrator for your camera. A static IP address<br />
may simplify access to your camera in the future.<br />
Enter the fixed IP address in this field.<br />
This number is used to determine if the destination<br />
is in the same subnet. The default value is<br />
255.255.255.0.<br />
The gateway used to forward frames to destinations<br />
in a different subnet. Invalid gateway settings may<br />
cause the failure of transmissions to a different<br />
subnet.<br />
The primary domain name server translates names<br />
to IP addresses.<br />
The secondary DNS acts as a backup to the primary<br />
DNS.<br />
18