You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration<br />
D-<strong>Link</strong> DCS-2130 User Manual<br />
Advanced<br />
This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical<br />
interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors<br />
and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.<br />
After making any changes, click the Save Settings button to save your changes.<br />
Select D/I or D/O Mode:<br />
LED:<br />
Digital Input/Output<br />
The camera will send a signal when an event is<br />
triggered, depending upon the type of device connected<br />
to the DI circuit.<br />
N.C. stands for Normally Closed. This means that<br />
the normal state of the circuit is closed. Therefore<br />
events are triggered when the device status changes<br />
to "Open."<br />
N.O. stands for Normally Open. This means that the<br />
normal state of the circuit is open. Therefore events<br />
are triggered when the device status changes to<br />
"Closed."<br />
You may specify whether or not to illuminate the LED<br />
on the side of the camera.<br />
42