WMF 450 operating instructions

Initial setupCaution!Danger of scalding!After the coffee system is rinsed, a strong jet of steam may be emitted from the machine.After the machine is heated up, the coffee system is rinsed. Thiswarms up all the pipes.> Place a collecting vessel for the rinse water (approx. 60 ml) underthe all-in-one spout.The coffee system rinsing procedure lasts for about. 60 seconds.At the end of the setup program, a test brew is carried out.> Place an appropriate suitable drinking vessel under the all-in-onespout.> Confirm with P .The test brewing starts. During this test brewing, coffee grinder isfilled with coffee beans.> Throw this first cup of coffee away.The WMF 450 is now ready for use.14