WMF 450 operating instructions

Care> Unscrew the black cap (4h) from the air intake pipe.> Mix one measuring cap of WMF milk system cleaner with 200 ml water in a container.> Place all parts of the milk system in the cleaning solution for minimum 5 hours or overnight.> Finally, rinse all the parts thoroughly under running water.> Clean the opening of the beverage spouts with the brushes provided.> Assemble the milk foamer again in the following manner (see illustration on page 46 on the right handside):- Push the top section into the lower section (4f), so that it clicks in place.- Screw the air inlet pipe (4g) in place.- Screw the black cap (4h) onto the air inlet pipe.- Insert the milk hose (4c) into the milk foamer again.> Insert the milk foamer into the All-in-One spout from below.> Push the All-in-One spout downwards.> Insert the milk hose into the guide.47