SS-R200, SS-CDR200 RS-232C documentation - Tascam

RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・KEYBOARD TYPE RETURNKEYBOARD TYPE RETURN is sent in response to the KEYBOARD TYPE SENSE command [5F] to show thecurrent keyboard type setting.CommandDFData2 bytesRequest command KEYBOARD TYPE SENSE [5F]Data 1 Data 2 Description Remarks0 0 Japanese0 1 US・ERROR SENSE REQUESTERROR SENSE REQUEST is sent from the controlled device to the external controller to show that thecontrolled device is in an error state. If the command is sent, the external controller issues the ERROR SENSEcommand [78]. Be sure to determine the error by using the ERROR SENSE command.CommandDataRequest commandF0NoneNone・CAUTION SENSE REQUESTCAUTION SENSE REQUEST is sent from the controlled device to the external controller to show that thecontrolled device is in a caution state. If the command is sent, the external controller issues the CAUTIONSENSE command [79]. Be sure to check the caution by using the CAUTION SENSE command.CommandDataRequest commandF1NoneNone・ILLEGAL STATUSILLEGAL STATUS is sent from the controlled device to the external controller to show that an invalid commandor data has been sent to the controlled device. If the command is sent, send a command or data again, makingsure that it is a valid command or data.CommandDataRequest commandF2NoneNone・POWER ON STATUSPOWER ON STATUS is sent from the controlled device to the external controller to show that the controlleddevice has been turned on.CommandDataRequest commandF4NoneNone- 33 -