Self-Study Programme 248 The W Engine Concept - VolksPage.Net
Self-Study Programme 248 The W Engine Concept - VolksPage.Net
Self-Study Programme 248 The W Engine Concept - VolksPage.Net
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Place the copper<br />
coloured chain link on<br />
the marked tooth of the<br />
intermediate shaft and<br />
the bore hole in the<br />
housing<br />
S<strong>248</strong>_178<br />
Place copper<br />
coloured chain link<br />
on arrow of bank I<br />
Bank I<br />
Normal tooth Marked tooth<br />
S<strong>248</strong>_194<br />
Insert camshaft rule for aligning the<br />
camshafts.<br />
Inlet camshaft<br />
advance adjustment<br />
S<strong>248</strong>_193<br />
Exhaust camshaft<br />
retard adjustment<br />
Place copper<br />
coloured chain link<br />
on arrow of bank II<br />
When placing on the lower timing chain copper, set the<br />
coloured chain link on the marked tooth and the marked tooth<br />
on the housing joint:<br />
piston in 1st cylinder at top dead centre.<br />
For a description of the exact procedure for<br />
setting the engine timing, please refer to the<br />
relevant Workshop Manual.<br />
55
Change language