CP3800DW User Manual English - Mitsubishi Electric Europe Benelux

More documents

Recommendations

Info

Trouble-shootingb. If the ribbon is pulled into the mechanism:1. Cut the ribbon.2. Carefully remove any ribbon remaining in the mechanism.Any pieces of ribbon left inside the mechanism could affect print quality.In this case, clean the platen roller see P.223. Reattach the ribbon with cellophane (or similar) tape.Tape4. Rotate the up-take ribbon several times until the tape is out of sight. Take care that there is no slack inthe ribbon.Then, refer to a. If the paper is jammed.19
Trouble-shootingc. If the printer is stopped in the middle of cutting:1. Turn the power back ON. Free the jammed paper, and return the cutter blade to its ready position.If the jammed paper cannot be freed, please contact a service representative.2. Remove any partially printed material from inside the mechanism unit.Then, refer to a. If the paper is jammed.d. If power is cut during printing:*If the power is cut during printing, you will not be able to pull out the mechanism unit.1. Turn the power back ON. The partial print will be cut into scrap-size pieces and removed.After this, you will be able to pull out the mechanism unit.2. Check that there is no printed material in the mechanism unit.If the paper is jammed, refer to a. If the paper is jammed.CAUTION・ Do not turn the power OFF while printing. This could damage the printer.20
Page 4 and 5: ●American, Canadian UsersCord set
Page 6 and 7: ItalianCon la presente Mitsubishi E
Page 9 and 10: Names of ComponentsSetting i g Up t
Page 11 and 12: Paper and RibbonSetting i gUp the e
Page 13 and 14: Setting nUp the Printer5. Install t
Page 15 and 16: Setting nUp the Printer9. Turn the
Page 17 and 18: Error DisplaysTrouble-shootingPower
Page 19: Trouble-shootingos og2. Remove the
Page 23 and 24: SpecificationsModelCP3800DWPrint ty

CP3800DW User Manual English - Mitsubishi Electric Europe Benelux

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?