You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PAGE 46<br />
Teacher Notes for use with Set 9795<br />
SECTION 5 INTERMEDIATE AND ADVANCED<br />
IDEAS USING INVESTIGATOR<br />
PILOT AND INVENTOR<br />
Students will:<br />
Write a program to make an input control an output using<br />
Inventor Level 5.<br />
Also in the program, capture data from a light and angle sensor over time.<br />
Graph the light and angle sensor data.<br />
Write a report about their project, describing the results.<br />
In the example program below, the light sensor is checked with a Light<br />
Sensor Fork and the angle sensor with the Angle Sensor Fork.The Land<br />
and Jump icons loop so the sensor checks continue until the light sensor<br />
is activated.<br />
To gather data, first initialize the sensor and remember to modify it with<br />
the correct port number. Here the light sensor is using the default setting<br />
of port 1 so it does not need a modifier. However, the temperature sensor<br />
icons need to be modified with the port 3 modifiers.<br />
The Describe Page template can be used to explain how the system works<br />
and the results.<br />
ACTIVITY<br />
4<br />
The Garage Door and Angle Sensor<br />
Learning Objectives<br />
Discussion
Change language