MODEL V1433XL, V1433 MODEL V1833XL, V1833 - MinnPar

MACHINE OPTIONS DESCRIPTION•The following descriptions are intended to be used with wiring diagrams at the end of thiselectrical section.STROBE LIGHT (OPTION)This option is to indicate that the machine is on or ready to operate. The strobe has: a plug-inflash tube for easy replacement, an energy output of2 joules, a power output of3 watts, and a flash rateof 60 + 10 flashes per minute. The strobe is energized whenever the control selector switch is in the"UPPER" or "LOWER" position and the lower control emergency stop button is pulled out.5°SLOPE ALARM (OPTION)This option sounds an alarm when the V141l833 is 5° or more out oflevel. A 5° omni-directionalsensor is mounted in the belly pan to sense a 5° out-of-Ievel condition. In this situation, a fast pulse/loudtone alarm at the upper control box (See FIG. 13), is activated until the machine is returned to a less than5° condition. This serves as a warning, and does not inhibit any functions. The sensor is mounted on aspring loaded base which is adjustable to allow leveling. Testing of the system is accomplished bymanually tilting the sensor against its spring tension mount, to physically put the sensor in a 5° out-oflevelcondition, causing the alarm to sound. Power is supplied to the sensor, and the alarm, only whenthe machine is in the "UPPER" control position. When the sensor is activated (5° or greater), the sensor'swhite wire (connected to the alarm), becomes grounded after a few second delay, through circuits insidethe sensor.BATTERY CONDITION INDICATOR (OPTION)This option is to monitor the batteries'state-of-charge, (See FIG. 13). The indicator iswired directly to the batteries with the 15 ampcircuit breaker, or fuse, included in the circuit.Consisting of an analog 10-LED bar display, theindicator provides a visual reference for readingproperly charged batteries (top LED lit), batteriesat 70% depth-of-discharge (second from bottomLED flashes), and when the batteries have reachedan 80% depth-of-discharge (bottom two LED'sflash alternately).BatteI)'ConditionIndicator08Slope AlarmFIG. 13SIGNAL HORN (OPTION)This option consists of a 133 db automotive type horn mounted in the chassis, and a whitepushbutton on the side of the upper control box (See FIG. 14). The hom is only operable when the controlselector switch is in the "UPPER" position.MANUAL 92370-002November 1997