• Ogura, H., Shimojyo, R., Kage, H., Matsuno, Y. and <strong>Mujumdar</strong>, A.S. Simulation <strong>of</strong>hydration/dehydration <strong>of</strong> CaO/Ca(OH) 2 chemical heat pump reaction forcold/hot heat generation, Drying Technology 1999, 17, 1579-1592.• Gong, Z.-X., Devahastin, S. and <strong>Mujumdar</strong>, A.S. Enhanced heat transfer inconvection-dominated melting in a rectangular cavity with an isothermalvertical wall, Applied Thermal Engineering 1999, 19, 1237-1251.• Ng, K.W., Devahastin, S., <strong>Mujumdar</strong>, A.S. and Arai, N. Passive enhancement <strong>of</strong>free-convection dominated melting <strong>of</strong> a phase change material in a horizontalcylindrical annulus, Journal <strong>of</strong> Chemical Engineering <strong>of</strong> Japan 1999, 32, 353-357.• Devahastin, S., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Hydrodynamiccharacteristics <strong>of</strong> a rotating jet annular spouted bed, Powder Technology 1999,103, 169-174.• Devahastin, S. and <strong>Mujumdar</strong>, A.S. Batch drying <strong>of</strong> grains in a well-mixed dryer-Effect <strong>of</strong> continuous and stepwise change in drying air temperature,Transactions <strong>of</strong> the ASAE 1999, 42, 421-425.1998• Khillarkar, D.B., Devahastin, S. and <strong>Mujumdar</strong>, A.S. Effect <strong>of</strong> flipping on freeconvective heat transfer during melting <strong>of</strong> a phase change material in concentrichorizontal annuli <strong>of</strong> different cross-section, Thermal Science 1998, 2, 27-43,.• Shiravi, A.H., <strong>Mujumdar</strong>, A.S. and Kubes, G.J. A mathematical model for drumdrying <strong>of</strong> black liquor slurry using superheated steam impinging jets, CanadianJournal <strong>of</strong> Chemical Engineering 1998, 76, 1056-1068.• Jumah, R.Y., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Aerodynamics <strong>of</strong> a novelrotating jet spouted bed, Chemical Engineering Journal 1998, 70, 209-219, 1998.• Devahastin, S., Siow, S.L. and <strong>Mujumdar</strong>, A.S. Effect <strong>of</strong> inclination on freeconvective heat transfer during melting <strong>of</strong> a phase change material in arectangular enclosure, Applied Mechanics and Engineering 1998, 3, 491-515.• Gong, Z.-X., <strong>Mujumdar</strong>, A.S., Itaya, Y., Mori, S. and Hasatani, M. Drying <strong>of</strong> clay andnonclay: Heat and mass transfer and quality aspects, Drying Technology 1998,16, 1119-1152.• Ng, K.W., Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Flow and heat transfer <strong>of</strong> convectiondominatedmelting <strong>of</strong> a phase change material in horizontal annulus,International Communications in Heat and Mass Transfer 1998, 25, 631-640.• Nishimura, A., Deguchi, S., Matsuda, H., Hasatani, M. and <strong>Mujumdar</strong>, A.S. Solidflow patterns and heat transfer characteristics in a pulsated fluidized bed withflowing large bubbles, Proceedings <strong>of</strong> the 11 th International Heat TransferConference 1998, Vol. 4, Kyongju, South Korea, 485-490.• Devahastin, S., Gong, Z.-X., <strong>Mujumdar</strong>, A.S. and Arai, N. Free convective heattransfer during melting <strong>of</strong> a phase change material in a rectangular enclosure:Effect <strong>of</strong> inclination, Proceedings <strong>of</strong> the 11 th International Heat TransferConference 1998, Vol. 7, Kyongju, South Korea, 133-138.• Ng, K.W., Devahastin, S. and <strong>Mujumdar</strong>, A.S. Free convective melting <strong>of</strong> a phasechange material in a horizontal cylindrical annulus, Tambov State TechnicalUniversity Transactions 1998, 4, 40-52.• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. A finite element model for convection-dominatedmelting and solidification problems, International Journal <strong>of</strong> Numerical Methodsfor Heat and Fluid Flow 1998, 8, 393-408.
• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Flow and heat transfer in convection-dominatedmelting in a rectangular cavity heated from below, International Journal <strong>of</strong> Heatand Mass Transfer 1998, 41, 2573-2580.• Devahastin, S., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Diffusion-controlled batchdrying <strong>of</strong> particles in a novel rotating jet annular spouted bed, DryingTechnology 1998, 16, 525-543.• Devahastin, S., Bassila, S. and <strong>Mujumdar</strong>, A.S. A colorimetric technique toquantify wheat grain damage during drying, Drying Technology 1998, 16, 341-349.• Raghavan, G.S.V., Kalwar, M.I. and <strong>Mujumdar</strong>, A.S. Static vertical pressure <strong>of</strong>grains on air inlets <strong>of</strong> two-dimensional non-aerated spouted beds, PowderHandling and Processing 1998, 10, 21-26.1997• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Convection-dominated melting in a rectangularcavity, Tambov State Technical University Transactions 1997, 3, 237-256.• Sablani, S.S., Ramaswamy, H.S. and <strong>Mujumdar</strong> A.S. Dimensionless correlations forconvective heat transfer to liquid and particles in cans subjected to end-over-endrotation, Journal <strong>of</strong> Food Engineering 1997, 34, 453-472.• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Finite element analysis <strong>of</strong> cyclic heat transfer in ashell and tube latent heat thermal storage exchanger, Applied ThermalEngineering 1997, 17, 583-591.• Ratti, C. and <strong>Mujumdar</strong>, A.S. Solar drying <strong>of</strong> foods: Modelling and numericalsimulation, Solar Energy 1997, 60, 151-157.• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Thermodynamic optimization <strong>of</strong> the thermalprocess in energy storage using multiple phase change materials, AppliedThermal Engineering 1997, 17, 1067-1083.• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Non-convergence versus non-conservation ineffective heat capacity methods for phase change problems, InternationalJournal <strong>of</strong> Numerical Methods for Heat and Fluid Flow 1997, 7, 565-579.• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. Finite element analysis <strong>of</strong> a multi-stage latentheat thermal storage system, Numerical Heat Transfer, Part A 1997, 30, 669-684.• Grabowski, S., <strong>Mujumdar</strong>, A.S., Ramaswamy, H.S. and Strumillo, C. Evaluation <strong>of</strong>fluidized versus spouted bed drying <strong>of</strong> baker's yeast, Drying Technology 1997,15, 625-634.• Passos, M.L., Massarani, G., Freire, J.T. and <strong>Mujumdar</strong>, A.S. Drying <strong>of</strong> pastes inspouted beds <strong>of</strong> inert particles: Design criteria and modeling, Drying Technology1997, 15, 605-624.• Gong, Z.-X., Devahastin, S. and <strong>Mujumdar</strong>, A.S. A two-dimensional finite elementmodel for wheat drying in a novel rotating jet spouted bed, Drying Technology1997, 15, 575-592.• Beke, J, <strong>Mujumdar</strong>, A.S. and Giroux, M. Some fundamental attributes <strong>of</strong> corn andpotato drying in microwave fields, Drying Technology 1997, 15, 539-554.• Parrouffe, J.M., Dostie, M., Navarri, P., Andrieu, J. and <strong>Mujumdar</strong>, A.S. Heat andmass transfer relationship in combined infrared and convective drying, DryingTechnology 1997, 15, 399-425.
- Page 1: LIST OF PUBLICATIONSArun S. Mujumda
- Page 4 and 5: • Zhang, F., Zhang, M., Mujumdar,
- Page 6 and 7: • Wang, R., Zhang, M., Mujumdar,
- Page 8 and 9: enhanced with microwave, Journal of
- Page 10 and 11: • Huang, L., Zhang, M., Mujumdar,
- Page 12 and 13: • Lim, L.C., Waje, S.S., Thorat,
- Page 14 and 15: • Huang, L.X. and Mujumdar, A.S.
- Page 16 and 17: • Birchal, V.S., Passos, L.M., Wi
- Page 18 and 19: • Chua, K.J., Mujumdar, A.S. and
- Page 20 and 21: • Devahastin, S. and Mujumdar, A.
- Page 24 and 25: • Pan, Y.-K., Li, Z.-Y., Mujumdar
- Page 26 and 27: • Bond, J.F., Mujumdar, A.S., van
- Page 28 and 29: • Kudra, T., Pan, Y.-K. and Mujum
- Page 30 and 31: • Jariwala, V.G., Mujumdar, A.S.
- Page 32 and 33: • H. Osman, S.V. Jangam and A.S.
- Page 34 and 35: Conference on Energy Sustainability
- Page 37 and 38: • Fazle Mahbub, M. N. A. Hawlader
- Page 39 and 40: • Huang, L., Mujumdar, A.S. and Z
- Page 41 and 42: • Alves-Filho, O. and Mujumdar, A
- Page 43 and 44: • Chen, G. and Mujumdar, A.S., Ap
- Page 45 and 46: • Mujumdar, A.S., Devahastin, S.,
- Page 47 and 48: • Tulasidas, T.N., Kudra, T., Rag
- Page 49 and 50: • Loo, E., Mujumdar, A.S., A simu
- Page 51 and 52: 3. PARTS (CHAPTERS) OF BOOKS (PARTI
- Page 53 and 54: • Jumah, R.Y. and Mujumdar, A.S.,
- Page 55 and 56: • Mujumdar, A.S., Alterman, D.S.,
- Page 57 and 58: • Li, S.Q., Gong, Z.X., Mujumdar,
- Page 59 and 60: • Mujumdar, A.S., Drying of Coate
- Page 61 and 62: • E. Totsas, and A.S. Mujumdar, E
- Page 63 and 64: • Doraiswamy, L.K., Mujumdar, A.S