• Kudra, T., Pan, Y.-K. and <strong>Mujumdar</strong>, A.S. Evaporation from single dropletsimpinging on heated surfaces, Drying Technology 1991, 9, 693-707.• Dong, Z.-X., Pan, Y.-K., Wei, Z. and <strong>Mujumdar</strong>, A.S. Effect <strong>of</strong> vibration on the dryingrate during the falling rate period, Drying Technology 1991, 9, 723-733.• Polat, S., <strong>Mujumdar</strong>, A.S., van Heiningen, A.R.P. and Douglas, W.J.M. Numericalmodel for turbulent jets impinging on a surface with throughflow, Journal <strong>of</strong>Thermophysics and Heat Transfer 1991, 5, 172-180.• Gong, Z.-X., Song, B. and <strong>Mujumdar</strong>, A.S. Numerical simulation <strong>of</strong> drying <strong>of</strong>refractory concrete, Drying Technology 1991, 9, 479-500.• Bond, J.-F., Crotogino, R.H., Douglas, W.J.M., <strong>Mujumdar</strong>, A.S. and van Heiningen,A.R.P. Impingement drying <strong>of</strong> paper in superheated steam in the constant rateperiod, Technology Today 1991, 5, 284-288.• Ju, S., Weber, M.E. and <strong>Mujumdar</strong>, A.S. Electroosmotic dewatering <strong>of</strong> bentonitesuspensions, Separations Technology 1991, 1, 214-221.• Hasan, M., <strong>Mujumdar</strong>, A.S. and Weber, M.E. Cyclic melting and freezing,Chemical Engineering Science 1991, 47, 1537-1587.• Polat, S., <strong>Mujumdar</strong>, A.S. and Douglas, W.J.M. Impingement heat transfer under aconfined slot jet, Part I: Effect <strong>of</strong> surface throughflow, Canadian Journal <strong>of</strong>Chemical Engineering 1991, 69, 266-273.• Polat, S., <strong>Mujumdar</strong>, A.S. and Douglas, W.J.M. Impingement heat transfer under aconfined slot jet, Part II: Effects <strong>of</strong> surface motion and throughflow, CanadianJournal <strong>of</strong> Chemical Engineering 1991, 69, 274-280.• Malhotra, K. and <strong>Mujumdar</strong>, A.S. Model for contact heat transfer in mechanicallystirred granular beds, International Journal <strong>of</strong> Heat Mass Transfer 1991, 34,415-425.• <strong>Mujumdar</strong>, A.S. Drying technologies <strong>of</strong> the future, Drying Technology 1991, 9,325-347.• Pan, Y.-K., Gan, Y.-M., Liu, X.-D., Wei, Z. and <strong>Mujumdar</strong>, A.S. Drying <strong>of</strong> stickygranular materials during the constant rate period in a vibrated fluidized bed,Drying Technology 1991, 9, 1067-1079.• Malhotra, K. and <strong>Mujumdar</strong>, A.S. Wall-to-bed heat transfer rates in mechanicallystirred granular beds, International Journal <strong>of</strong> Heat Mass Transfer 1991, 34,427-435.1990• Kudra, T., <strong>Mujumdar</strong>, A.S., Raghavan, G.S.V. and Kalwar, M.I. Two-dimensionalspouted beds for thermal processing, Powder Handling and Processing 1990, 2,347-353.• Passos, M.L., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Spouted and spout-fluidizedbeds for grain drying, Drying Technology 1990, 7, 660-696.• Malhotra, K. and <strong>Mujumdar</strong>, A.S. Effects <strong>of</strong> particle shape on particle-surfacethermal contact resistance, Journal <strong>of</strong> Chemical Engineering <strong>of</strong> Japan 1990, 23,510-513.• Polat, S., <strong>Mujumdar</strong>, A.S., van Heiningen, A.R.P. and Douglas, W.J.M. Effect <strong>of</strong> nearwallmodelling on prediction <strong>of</strong> impingement heat transfer, Drying Technology1990, 8, 705-730.
• Malhotra, K., Miyahara, M. and <strong>Mujumdar</strong>, A.S. Estimation <strong>of</strong> particle renewalrates along the wall in mechanically stirred granular beds, Chemical Engineeringand Processing 1990, 27, 121.• Kumar, P. and <strong>Mujumdar</strong>, A.S. Effect <strong>of</strong> drying on pulp and paper properties: Abibliography, Drying Technology 1990, 8, 543-569.• Kumar, P. and <strong>Mujumdar</strong>, A.S. Superheated steam drying: A bibliography, DryingTechnology 1990, 8, 195-205.• Kumar, P., <strong>Mujumdar</strong>, A.S. and Koran, Z. Microwave drying: Effects on paperproperties, Drying Technology 1990, 8, 1061-1088.1989• Lawal, A. and <strong>Mujumdar</strong>, A.S. Viscous dissipation effects on thermal entranceheat transfer to power-law fluids in arbitrary cross-sectional ducts, ChemicalEngineering Journal 1989, 41, 57-66.• Kudra, T., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Gas-to-particle heat transfer intwo-dimensional spouted beds, International Communications in Heat and MassTransfer 1989, 16, 731-741.• Poirier, N. and <strong>Mujumdar</strong>, A.S. Numerical solutions to the Graetz problem –Achieving accuracy in the entrance region, International Communications inHeat and Mass Transfer 1989,16, 205-514.• Erdesz, K. and <strong>Mujumdar</strong>, A.S. Numerical investigation <strong>of</strong> a phenomenologicalmodel <strong>of</strong> a vibrated fluidized bed, Drying Technology 1989, 7, 487-502.• Kudra, T. and <strong>Mujumdar</strong>, A.S. Impinging stream dryers for particles and pastes,Drying Technology 1989, 7, 219-266.1988• <strong>Mujumdar</strong>, A.S. and Erdesz, K. Applications <strong>of</strong> vibration techniques for dryingand agglomeration in food processing, Drying Technology 1988, 6, 275-290.• Malhotra, K., <strong>Mujumdar</strong>, A.S., Imakoma, H. and Okazaki, M. Fundamental particlemixing studies in an agitated bed <strong>of</strong> granular materials in a cylindrical vessel,Powder Technology 1988, 55, 107-114.• <strong>Mujumdar</strong>, A.S. and Passos, M.L. Dryer design project – A tool to teach drying anddesign to undergraduates, Drying Technology 1988, 6, 275-290.1987• Filkova, I., Lawal, A. and <strong>Mujumdar</strong>, A.S. Heat transfer and power-law fluids intube flow: Numerical and experimental studies, Journal <strong>of</strong> Food Engineering1987, 6, 143-151.• Malhotra, K. and <strong>Mujumdar</strong>, A.S. Immersed surface heat transfer in a vibratedfluidized bed, Industrial and Engineering Chemistry Research 1987, 26, 1983-1992.• Fallavollita, J.A., Avedesian, M.M. and <strong>Mujumdar</strong>, A.S. Kraft black liquor recoveryin a fluidized bed, Canadian Journal <strong>of</strong> Chemical Engineering 1987, 65, 812-817.• Weber, M.E., Witwit, S.M. and <strong>Mujumdar</strong>, A.S. A model for electro-osmoticdewatering under constant voltage, Drying Technology 1987, 5, 467-474.
- Page 1: LIST OF PUBLICATIONSArun S. Mujumda
- Page 4 and 5: • Zhang, F., Zhang, M., Mujumdar,
- Page 6 and 7: • Wang, R., Zhang, M., Mujumdar,
- Page 8 and 9: enhanced with microwave, Journal of
- Page 10 and 11: • Huang, L., Zhang, M., Mujumdar,
- Page 12 and 13: • Lim, L.C., Waje, S.S., Thorat,
- Page 14 and 15: • Huang, L.X. and Mujumdar, A.S.
- Page 16 and 17: • Birchal, V.S., Passos, L.M., Wi
- Page 18 and 19: • Chua, K.J., Mujumdar, A.S. and
- Page 20 and 21: • Devahastin, S. and Mujumdar, A.
- Page 22 and 23: • Ogura, H., Shimojyo, R., Kage,
- Page 24 and 25: • Pan, Y.-K., Li, Z.-Y., Mujumdar
- Page 26 and 27: • Bond, J.F., Mujumdar, A.S., van
- Page 30 and 31: • Jariwala, V.G., Mujumdar, A.S.
- Page 32 and 33: • H. Osman, S.V. Jangam and A.S.
- Page 34 and 35: Conference on Energy Sustainability
- Page 37 and 38: • Fazle Mahbub, M. N. A. Hawlader
- Page 39 and 40: • Huang, L., Mujumdar, A.S. and Z
- Page 41 and 42: • Alves-Filho, O. and Mujumdar, A
- Page 43 and 44: • Chen, G. and Mujumdar, A.S., Ap
- Page 45 and 46: • Mujumdar, A.S., Devahastin, S.,
- Page 47 and 48: • Tulasidas, T.N., Kudra, T., Rag
- Page 49 and 50: • Loo, E., Mujumdar, A.S., A simu
- Page 51 and 52: 3. PARTS (CHAPTERS) OF BOOKS (PARTI
- Page 53 and 54: • Jumah, R.Y. and Mujumdar, A.S.,
- Page 55 and 56: • Mujumdar, A.S., Alterman, D.S.,
- Page 57 and 58: • Li, S.Q., Gong, Z.X., Mujumdar,
- Page 59 and 60: • Mujumdar, A.S., Drying of Coate
- Page 61 and 62: • E. Totsas, and A.S. Mujumdar, E
- Page 63 and 64: • Doraiswamy, L.K., Mujumdar, A.S