Publications of Prof. Arun S. Mujumdar (1978- January 2012)
Publications of Prof. Arun S. Mujumdar (1978- January 2012)
Publications of Prof. Arun S. Mujumdar (1978- January 2012)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Bond, J.F., <strong>Mujumdar</strong>, A.S., van Heiningen, A.R.P. and Douglas W.J.M. Drying paperby impinging jets <strong>of</strong> superheated steam, Part I: Constant drying rate insuperheated steam, Canadian Journal <strong>of</strong> Chemical Engineering 1994, 72, 446-451.• Bond, J.F., <strong>Mujumdar</strong>, A.S., van Heiningen, A.R.P. and Douglas, W.J.M. Dryingpaper by impinging jets <strong>of</strong> superheated steam, Part II: Comparison <strong>of</strong> steam andair as drying fluids, Canadian Journal <strong>of</strong> Chemical Engineering 1994, 72, 452-456.• Poirier, N.A., Crotogino, R.H., <strong>Mujumdar</strong>, A.S. and Douglas, W.J.M., The effect <strong>of</strong>superheated steam drying on the properties <strong>of</strong> TMP paper, Journal <strong>of</strong> Pulp andPaper Science 1994, 20, J97-J102.• Etemad, S.Gh., <strong>Mujumdar</strong>, A.S. and Huang, B. Viscous dissipation effects inentrance region heat transfer for a power law fluid flowing between parallelplates, International Journal <strong>of</strong> Heat and Fluid Flow 1994, 15, 122-132.• Etemad, S.Gh. and <strong>Mujumdar</strong>, A.S. Effect <strong>of</strong> aspect ratio and rounded corners onlaminar forced convection heat transfer <strong>of</strong> a non-Newtonian fluid, InternationalCommunications in Heat Mass Transfer 1994, 21, 283-296.• Seyedein, S.H., Hasan, M. and <strong>Mujumdar</strong>, A.S. Laminar flow and heat transfer formultiple impinging slot jets with an inclined confinement surface, InternationalJournal <strong>of</strong> Heat and Mass Transfer 1994, 37, 1867-1875.• Seyedein, S.H., Hasan, M. and <strong>Mujumdar</strong>, A.S. Modelling <strong>of</strong> single confinedturbulent slot jet impingement using different various k-e turbulence models,Applied Mathematical Modelling 1994, 8, 526-537.• Rabie, H.R., <strong>Mujumdar</strong>, A.S. and Weber, M.E. Interrupted electro-osmoticdewatering <strong>of</strong> clay suspensions, Separation Technology 1994, 4, 38-46.• Passos, M.L., <strong>Mujumdar</strong>, A.S. and Massarani, G. Scale-up <strong>of</strong> spouted bed dryers:Criteria and applications, Drying Technology 1994, 12, 351-391.1993• Gong, Z.-X. and <strong>Mujumdar</strong>, A.S. A model for kiln drying <strong>of</strong> refractory concreteslabs, Drying Technology 1993, 11, 1617-1639.• Kalwar, M.I., Raghavan, G.S.V. and <strong>Mujumdar</strong>, A.S. Circulation <strong>of</strong> particles in twodimensionalspouted beds with draft plates, Powder Technology 1993, 77, 233-242.• Passos, M.L., <strong>Mujumdar</strong>, A.S. and Raghavan, G.S.V. Prediction <strong>of</strong> maximumspoutable bed height in two-dimensional spouted beds, Powder Technology1993, 74, 97-105.• Tim<strong>of</strong>eev, O. and <strong>Mujumdar</strong>, A.S. Press drying, condebelt drying and impulsedrying <strong>of</strong> paper, A selective bibliography, Drying Technology 1993, 11, 1885-1902.• Beke, J., Vas, A. and <strong>Mujumdar</strong>, A.S. Impact <strong>of</strong> process parameters on nutritionalvalue <strong>of</strong> convectively dried grains, Drying Technology 1993, 11, 1415-1428.• Ratti, C. and <strong>Mujumdar</strong>, A.S. Fixed bed batch drying <strong>of</strong> shrinking particles withtime-varying drying air conditions, Drying Technology 1993, 11, 1311-1335.• Jumah, R.Y. and <strong>Mujumdar</strong>, A.S. A PC program for preliminary design <strong>of</strong> acontinuous well-mixed fluid bed dryer, Drying Technology 1993, 11, 831-846.
Change language