CONTOUR CUTTING WITH OPOS for the SC - Summa Online

OPOS SEUser’s Manual10.2.2 USING THE CUTTER’S CONTROL PANELUse the following procedure when cutting the same graphic on multiplesheets:1. Load the first sheet into the cutter. (See Section 6, “Loading the Cutter.”)2. Set Special Load and the OPOS parameters using the cutter’s controlpanel. (See Section 7, “Setting Special Load and the OPOSParameters.”)3. Press the , then press repeatedly until SYSTEM SETUP isdisplayed... .. .. ..4. Press . CONFIDENCE will appear on the LCD.10. 5. Press repeatedly until OPOS SETTINGS appears on the LCD... .. .. ..11. Press . X-Distance will appear on the LCD... . . .. ..6. Press until SHEET MODE appears on the LCD... . ..7. Press, then once. ON will appear on the LCD... . ..8. Press . An asterisk () will be displayed to indicate that the newsetting has been entered. Changing the setting without pressing willcause the parameter to revert to its previous setting... . ..8. Press three times to return to the ONLINE screen.20-25