UHF-RW-MP-232-V1 - RFID Shop

More documents

Recommendations

Info

8.3.3 Read Data 6BThe command is used to start to read several bytes from the designated address.Data[]Len Adr CmdCRC-16Address ID Num0x0e 0xXX 0x52 0xXX 8 Bytes 0xXX LSB MSBParameter Connect:Address: The tag’s start byte address to read. The range is 0-223. Otherwise, it returnsthe parameters error message.Num: In byte units. It specifies the number of 8-bit bytes to be read. The value range is1-32, and Address + Num must be less than 224. Otherwise, it returns the parameterserror message.ID: 8 bytes, it is 6B tag’s UID. The low byte is fist.Respond:Len Adr reCmd Status Data[] CRC-160x05 0xXX 0x52 0x00 Data LSB MSBData: It is read data, the low byte is fist.8.3.4 Write Data 6BThe command is used to start to write several bytes from the designated address.Command:Data[]Len Adr CmdCRC-16Address ID Wdata0xXX 0xXX 0x53 0xXX 8 Bytes Variable LSB MSBParameter Connect:Address: The tag’s start byte address to write. The range is 8-223. Otherwise, it returnsthe parameters error message.ID: 8 bytes, it is 6B tag’s UID. The low byte is fist.Wdata: It pointed to the array to write, range is 1-32. If Address + WriteDataLengreater than 224, or Wdata greater than 32 or is zero, reader will return parameter errormessage. The high bytes of Wdata write in the low address in tag.Respond:reCm StatuLen AdrData[] CRC-16d s0x05 0xXX 0x53 0x00 Data LSB MSB30
8.3.5 Check Lock 6BThe command is used to check whether the designated byte is locked.Command:Data[]Len Adr CmdCRC-16Address ID0x0d 0xXX 0x54 0xXX 8 Bytes LSB MSBParameter Connect:Address: The tag’s byte address to check lock. The range is 0-223. Otherwise, it returnsthe parameters error message.ID: 8 bytes, it is 6B tag’s UID. The low byte is fist.Respond:reCmLen AdrStatus Data[] CRC-16d0x06 0xXX 0x54 0x00 LockState LSB MSBLockState:0x00: Unlocked0x01: locked8.3.6 Lock 6BThe command is used to lock the designated byte.Command:Data[]Len Adr CmdCRC-16Address ID0x0d 0xXX 0x55 0xXX 8 Bytes LSB MSBParameter Connect:Address: The tag’s byte address to lock. The range is 8-223. Otherwise, it returns theparameters error message.ID: 8 bytes, it is 6B tag’s UID. The low byte is fist.Respond:Len Adr reCmd Status Data[] CRC-160x05 0xXX 0x55 0x00 ----- LSB MSB8.4 READ-DEFINED COMMAND8.4.1 Get Reader InformationThe host sends this command to get the reader’s information including reader’s address(Adr), firmware version, reader type (Type), supported protocol (Tr_Type), reader power,work frequency, and InventoryScanTime value.31
Page 1: UHF-RW-MP-232-V1 (RRU1861)User's Ma
Page 4 and 5: 3. DATA BLOCK FORMAT3.1 COMMAND DAT
Page 6 and 7: 3 Write Data 0x034 Write EPC 0x045
Page 8 and 9: This function is used to set a new
Page 11 and 12: 5 0xXX 0x0a 0x0e __ LSB+MSB5 0xXX 0
Page 13 and 14: 5 0xXX 0xXX 0xFD __ LSB+MSB5 0xXX 0
Page 15 and 16: user area in G2 tag of Inpinj Compa
Page 17 and 18: 0xXX Variable 0xXX 0xXX 0xXX 4Byte
Page 19 and 20: example, MaskAdr = 0x00 specifies t
Page 21 and 22: unwriteable, then later cannot chan
Page 23 and 24: memory. Other values reserved. Othe
Page 25 and 26: Respond:Len Adr reCmd Status Data[]
Page 27 and 28: 0x05 0xXX 0x0c 0x00 ----- LSB MSB8.
Page 29: 8.3.2 Inventory Multiple 6BThe comm
Page 33 and 34: 8.4.2 Set RegionThe host sends this
Page 35 and 36: Len Adr reCmd Status Data[] CRC-160
Page 37 and 38: Len Adr reCmd Status Data[] CRC-160
Page 39: Respond:Len Adr reCmd Status Data[]

UHF-RW-MP-232-V1 - RFID Shop

Create successful ePaper yourself

Delete template?

Save as template?