UHF-RW-MP-232-V1 - RFID Shop

More documents

Recommendations

Info

etc.Word_Num: Only RS232 output, it is valid. It specifies the number of word for thememory read. The value range is 1-32.Reserved: RFU, the default value is zero.Output Format Connect In The Scan Mode Or Trigger Mode:RS232/RS485, serial output format is as follows:Notes: RS232/RS485 serial output mode, these must be no tag in the effective fieldwhen set reader parameter.1, 18000-6C Protocol, Mem_Inven is 0x00-0x03:Len Adr reCmd Status Data[] CRC-160xXX 0xXX 0xee 0x00 Word1, Word2,… LSB MSBParameter Connect:Word1, Word2….: In word units, one word is two bytes. High-byte is first. Word1is the word which reads from the start address, Word2 is the word which reads from thesecond address, etc.2, 18000-6C Protocol, Mem_Inven is 0x04:Len Adr reCmd Status Data[] CRC-160xXX 0xXX 0xee 0x00 EPC ID LSB MSBParameter Connect:EPC ID: G2 tag’s ECP, The most significant word (EPC C1 G2 data in word units) ofEPC is transmitted first and the most significant byte of word is transmitted first.3, 18000-6B Protocol:Len Adr reCmd Status Data[] CRC-160xXX 0xXX 0xee 0x00 Word1, Word2,… LSB MSBParameter Connect:Data []: A 6B tag’s UID. UID length is 8 bytes. The least significant byte of UID istransmitted first.8.4.10 Get WorkModeThe host sends this command to get the reader’s information including reader’s Wiegandparameter, WorkMode parameter.Command:Len Adr Cmd Data[] CRC-160x04 0xXX 0x36 ----- LSB MSB38
Respond:Len Adr reCmd Status Data[] CRC-16Wg_mode, Wg_Data_Inteval,Wg_Pulse_Width,0x0f 0xXX 0x36 0x00Wg_Pulse_Inteval,Read_mode, Mode_state,LSB MSBMem_Inven, First_Adr,Word_Num, ReservedParameter Connect:Wg_mode, Wg_Data_Inteval, Wg_Pulse_Width, Wg_Pulse_Inteval: Wiegandparameters.Read_mode, Mode_state, Mem_Inven, First_Adr, Word_Num, Reserved:WorkMode parameters.39
Page 1: UHF-RW-MP-232-V1 (RRU1861)User's Ma
Page 4 and 5: 3. DATA BLOCK FORMAT3.1 COMMAND DAT
Page 6 and 7: 3 Write Data 0x034 Write EPC 0x045
Page 8 and 9: This function is used to set a new
Page 11 and 12: 5 0xXX 0x0a 0x0e __ LSB+MSB5 0xXX 0
Page 13 and 14: 5 0xXX 0xXX 0xFD __ LSB+MSB5 0xXX 0
Page 15 and 16: user area in G2 tag of Inpinj Compa
Page 17 and 18: 0xXX Variable 0xXX 0xXX 0xXX 4Byte
Page 19 and 20: example, MaskAdr = 0x00 specifies t
Page 21 and 22: unwriteable, then later cannot chan
Page 23 and 24: memory. Other values reserved. Othe
Page 25 and 26: Respond:Len Adr reCmd Status Data[]
Page 27 and 28: 0x05 0xXX 0x0c 0x00 ----- LSB MSB8.
Page 29 and 30: 8.3.2 Inventory Multiple 6BThe comm
Page 31 and 32: 8.3.5 Check Lock 6BThe command is u
Page 33 and 34: 8.4.2 Set RegionThe host sends this
Page 35 and 36: Len Adr reCmd Status Data[] CRC-160
Page 37: Len Adr reCmd Status Data[] CRC-160

UHF-RW-MP-232-V1 - RFID Shop

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?