12.07.2015 Views

GEA CAIRplus - CS Klimateknik

GEA CAIRplus - CS Klimateknik

GEA CAIRplus - CS Klimateknik

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installation and Assembly<strong>GEA</strong> <strong>CAIRplus</strong>5.2.2 Installation of individual modulesTo assemble individual modules (dividing joint) proceed as follows:• Affix provided sealings to the dividing joint(speacial assembly instructions provided with thesealings).Fig. 5-10: Installing individual modulesDAMAGE TO THE UNIT!Do not attach tensioning belts/hoisting devices to heat exchanger connections,condensate drains and door handles or use these to pull or push theequipment!• Position the unit parts as close to one another as possible prior to assembly.Only use the unit base frame to pull the individual components together. Unitsthat do not have a base frame must be pulled together with tensioning belts.These must be positioned round the profiles in the base or roof area.max. 100 mmFig. 5-11: Unit with base frameFig. 5-12: Unit without base frame28 PR-2009-0096-GB • Subject to modifications • Status 07/2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!