CONTACT MEASURING - Teknikel

7 Straight LVDT probes, ZDB pneumatic thrustZDB 106E339412/006ZDB 256E339412/009ZDB 506E339412/012ZDB 746E339412/020ZDB1006237501016pressurepositionidlepositionA : mechanical retraction of 10mm. Operation of the ZDB746 probe. Check the diameterThe probes are shown at electric zero.A : 10mm mechanical retraction. Pneumatic PushprincipleCMZ,CSZ...thrust or retractionelectronic probesvalve controldevice. Accessories :- pneumatic plate for probe withpneumatic push : E344010/0001/4 BSP4 holespneumatic plate for retractionor thrust probesIn the idle positionthe probes are inthe retracted position.Measuring positionis obtained by pressure.TypePneumatic pushProbedescriptionPart numberZDB 106(straight)E339412/006ZDB 256(straight)E339412/009ZDB 506(straight)E339412/012ZDB 746(straight)E339412/020ZDB 1006(straight)237501016Measuring range± 1mm± 2.5mm±5mm±1mm± 10mmContact tip travel :- recess (E)- release (L)1.35 ±0.2 mm1.15 ±0.05 mm3.35 ±0.2 mm2.65 ±0.05 mm5.85 ±0.2 mm5.15 ±0.05 mm9.85 ±0.2 mm1.15 ±0.05 mm10.85 ±0.2 mm10.15 ±0.05 mmMeasuring strength(horizontal probe)0.80N to 0,4bar2.50N to 1bar0.85N to 0.4bar2.50N to 1bar0.70N to 0.4bar2.50N to 1bar0.35N to 0.4bar1.90N to 1bar0.70N to 0.4bar2.50N to 1barRepeatability error< 0.15µm< 0.15µm< 0.15µm< 0.15µm< 0.30µmStorage temperature-40°C to +105°C-40°C to +105°C-40°C to +105°C-40°C to +105°C-40°C to +105°COperating temperature-5°C to +80°C-5°C to +80°C-5°C to +80°C-5°C to +80°C-5°C to +80°CProtection indexIP65IP65IP65IP65IP65Pneumaticpushpressure(b)(MPA)(PSI)0.4 < P’ < 1400 < P’ < 10006 < P’ < 140.4 < P’ < 1400 < P’ < 10006 < P’ < 140.4 < P’ < 1400 < P’ < 10006 < P’ < 140.4 < P’ < 1400 < P’ < 10006 < P’ < 140.4 < P’ < 1400 < P’ < 10006 < P’ < 14