12.07.2015 Views

Light Vehicle Inspection Manual (PDF 7MB) - Transport

Light Vehicle Inspection Manual (PDF 7MB) - Transport

Light Vehicle Inspection Manual (PDF 7MB) - Transport

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Section 10: Fuel SystemsLPG/LNG/CNG <strong>Vehicle</strong>sAustralian Design Rules relevant to this section:ADR 44 Special Purpose <strong>Vehicle</strong> RequirementsADR 79 Emission Control For <strong>Light</strong> <strong>Vehicle</strong>sADR 80 Emission Control for Heavy <strong>Vehicle</strong>sNote: 1) ADR 79 applies to vehicles operating on LPG/CNG with a GVM of 3500kg or less as of 1st January 200. 2) ADR 80applies vehicles operating on LPG/LNG with a GVM in excess of 3500kg as of 1st January 2004.OBJECTIVE: To ensure the LPG/LNG/NGV fuel system and associated components are fitted accordance with theregulations and operate in a safe manner.10.1 Visually inspect for the presence of an approved LPG/LNG/CNG modification plate and number plate labels<strong>Vehicle</strong>s under three years of age with systems installed within this stateInstallation of LPG/LNG/CNG must be done in accordance with State regulations and licensing requirements.A modification plate from a licensed gas fitter/installer must be fitted to the vehicle, as part of installation.<strong>Vehicle</strong>s under three years of age with systems installed in another Australian State or TerritoryA vehicle which has an LPG/LNG/CNG fuel system fitted and which is registered in another State or Territory may beaccepted if:a) a metal plate is fitted in a prominent position near the installation, showing• a statement that the installation complies with the Standards Australia code for the fuel type (AS1425 for LPGand AS2739 for LNG/NGV).• the date the installation was commissioned.• the State or Territory where installation was made.• the identification number of the suitably qualified installer.ANDThe installation passes a safety check inspection conducted by an authorised gas fitter/installer.<strong>Vehicle</strong>s in excess of three years of age or do not comply with either of the aboveBe failed for inspection and document on the inspection report “LPG/LNG/CNG Certification required”.Reasons for rejectiona) <strong>Vehicle</strong>s over three years of age, irrespective of when a LPG/LNG/CNG modification plate was affixed.b) <strong>Vehicle</strong> does not have an approved LPG/LNG/CNG modification plate. Acceptable plates are either:• a plate fitted by a State or Territory authorised/licensed gas fitter/installer; ORa plate fitted by the vehicle manufacturer, where the LPG/LNG or CNG system was installed by the originalvehicle manufacturer.The following are examples of acceptable plates that have been fitted by vehicle manufacturers.<strong>Light</strong> <strong>Vehicle</strong> <strong>Inspection</strong> <strong>Manual</strong>Version 11, December 2013 45

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!