Simulator Quality Management Systems Working Group

More documents

Recommendations

Info

9. Interim Qualification PolicyPURPOSEThe following statements outline the policy of [SPONSOR] regarding application for InitialQualification for those FSTDs operating under an Interim Qualification. This policy intends tosatisfy §60.21 and Appendix E, Table E1, Element E1.26.SCOPEThis policy includes all FSTDs sponsored by [SPONSOR] that are operating under an InterimQualification.RESPONSIBILITY_____ is responsible for maintenance and dissemination of this process; _______is/areresponsible for execution.POLICYWithin twelve months of the release of the final aircraft data package by the aircraftmanufacturer, but no later than two years after the issuance of the interim qualification status,the MR must apply for initial qualification in accordance with §60.15 based on the finalaircraft data package approved by the aircraft manufacturer.RECORDS RETENTIONRefer to 25. Record Control Policy for details on record documentation and retention.4/7/2010 14
10. Requesting Additional QualificationPURPOSEThis procedure defines the process for requesting additional qualification for currentlyqualified FSTDs. This process intends to satisfy requirements found in §60.16 and AppendixE, Table E1, Element E1.18.Adding qualifications to the SOQ will typically occur in conjunction with an FSTDmodification. Accordingly, reference processes 18. FSTD Modification Policy and 19. Using aModified FSTD.SCOPEThis policy includes all FSTDs sponsored by [SPONSOR].RESPONSIBILITY_____ is responsible for maintenance and dissemination of this process; _______is/areresponsible for execution.POLICY[SPONSOR] may wish to add specific training capabilities to the original SOQ, after the initialqualification of the FSTD. A request for evaluation of must be submitted to the NSPM for theadditional qualification, including details concerning the modification.An evaluation will be scheduled to perform the elements of an initial evaluation as determinedby the NSPM. Upon the successful completion of an evaluation, an amended SOQ must beposted until an updated SOQ is received from the NSPM.PROCEDURE1. Submit supporting data for the modification to the NSPM, including Modifications to the FSTD required to support the additional qualification, Modifications to the MQTG required to support the additional qualification, and A statement prepared in accordance with §60.15(c) that a pilot, designated by thesponsor in accordance with §60.15(d), has subjectively evaluated the FSTD in thoseareas not previously evaluated.2. Coordinate with the NSP to schedule a date for evaluation consisting of the elements ofinitial qualification determined by the NSP.3. Coordinate with maintenance or training organizations to provide a person who is a user ofthe device and knowledgeable in the operation of the aircraft and the operation of theFSTD for the evaluation date.4. After the successful completion of an evaluation, an amended SOQ must be posted until anupdated SOQ is provided by the NSPM.4/7/2010 15
Page 1 and 2: ToSimulator QualityManagement Syste
Page 3 and 4: Simulator Quality Management System
Page 5 and 6: Revision RecordAll revisions must b
Page 7 and 8: Quality Policy Statement[SPONSOR FS
Page 9 and 10: Policies & Procedures4/7/2010 1
Page 11 and 12: 2. Selection of Management Represen
Page 13 and 14: 4. Internal AssessmentsPURPOSEThis
Page 15 and 16: 5. Forward assessment document(s) t
Page 17 and 18: 6. Validation Data Suitability and
Page 19 and 20: 8. Requesting Initial or Upgrade FS
Page 21: 6.2. Affix the identity and signatu
Page 25 and 26: 11. Scheduling Continuing Qualifica
Page 27 and 28: 13. Special Equipment for Evaluatio
Page 29 and 30: 15. MQTG Maintenance and Control Po
Page 31 and 32: 17. Performing Quarterly QTG TestsP
Page 33 and 34: 19. Using a Modified FSTDPURPOSEThi
Page 35 and 36: 20. FSTD Functional Preflight Check
Page 37 and 38: 22. MMI Classification PolicyPURPOS
Page 39 and 40: 23. MMI Tracking and ReportingPURPO
Page 41 and 42: 25. Record Control PolicyPURPOSEThi
Page 43 and 44: Appendix4/7/2010 35
Page 45 and 46: 5. Functional Flyout5.1. APU/Engine
Page 47 and 48: Table E.2. / E.7(A) SQMS - Sponsor
Page 69 and 70: Table E.2. APPENDIX 1: SQMS Respons
Page 71 and 72: • NSPM-Authorized Simulation Disc
Page 73 and 74:
Table E.2. APPENDIX 5: Minimum SQMS
Page 75 and 76:
Table E.2. APPENDIX 6: SQMS Structu
show all

Simulator Quality Management Systems Working Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?