Simulator Quality Management Systems Working Group

More documents

Recommendations

Info

14. Posting FSTD Statement of QualificationPURPOSEThis procedure defines the requirements for posting the Statement of Qualification (SOQ) foreach FSTD. This procedure intends to satisfy requirements found in §60.9(b)(2) andAppendix E, Table E1, Element E1.9.SCOPEThis policy includes all FSTDs sponsored by [SPONSOR].RESPONSIBILITY_____ is responsible for maintenance and dissemination of this process; _______is/areresponsible for execution.POLICYThe current SOQ must be posted in or adjacent to the FSTD.Amendments to the SOQ must be posted until such time as an updated SOQ is received fromthe NSPM.RECORDS RETENTIONRefer to 26. Record Control Policy for details on record documentation and retention.4/7/2010 20
15. MQTG Maintenance and Control PolicyPURPOSEThis policy covers retention, modification, and access to Master Qualification Test Guides(MQTGs). It intends to satisfy requirements found in §60.15(h) and (i); §60.31(a)(1);Appendices A, B, C, and D sections 11.(b)(3)-11.(e); and Appendix E, Table E1, ElementsE1.16, E1.17, and E1.33a.SCOPEThis policy includes all FSTDs sponsored by [SPONSOR].RESPONSIBILITY_____ is responsible for maintenance and dissemination of this process; _______is/areresponsible for execution.POLICYAfter initial qualification, the FAA-witnessed tests must be included in the QTG. Thisdocument then becomes the MQTG for the FSTD. An electronic or hard copy of the MQTGmust be made available in an acceptable form to the NSPM upon request.In addition, the MQTG must be updated whenever: A modification is made to the simulator that requires a change to the MQTG, or The FSTD is modified as a result of an FSTD Directive (FD). In this instance, the FDmust be retained in the MQTG Table of FSTD Directives.RECORDS RETENTIONA record of all amendments to the MQTG must be maintained.Refer to 25. Record Control Policy for details on record documentation and retention.4/7/2010 21
Page 1 and 2: ToSimulator QualityManagement Syste
Page 3 and 4: Simulator Quality Management System
Page 5 and 6: Revision RecordAll revisions must b
Page 7 and 8: Quality Policy Statement[SPONSOR FS
Page 9 and 10: Policies & Procedures4/7/2010 1
Page 11 and 12: 2. Selection of Management Represen
Page 13 and 14: 4. Internal AssessmentsPURPOSEThis
Page 15 and 16: 5. Forward assessment document(s) t
Page 17 and 18: 6. Validation Data Suitability and
Page 19 and 20: 8. Requesting Initial or Upgrade FS
Page 21 and 22: 6.2. Affix the identity and signatu
Page 23 and 24: 10. Requesting Additional Qualifica
Page 25 and 26: 11. Scheduling Continuing Qualifica
Page 27: 13. Special Equipment for Evaluatio
Page 31 and 32: 17. Performing Quarterly QTG TestsP
Page 33 and 34: 19. Using a Modified FSTDPURPOSEThi
Page 35 and 36: 20. FSTD Functional Preflight Check
Page 37 and 38: 22. MMI Classification PolicyPURPOS
Page 39 and 40: 23. MMI Tracking and ReportingPURPO
Page 41 and 42: 25. Record Control PolicyPURPOSEThi
Page 43 and 44: Appendix4/7/2010 35
Page 45 and 46: 5. Functional Flyout5.1. APU/Engine
Page 47 and 48: Table E.2. / E.7(A) SQMS - Sponsor
Page 69 and 70: Table E.2. APPENDIX 1: SQMS Respons
Page 71 and 72: • NSPM-Authorized Simulation Disc
Page 73 and 74: Table E.2. APPENDIX 5: Minimum SQMS
Page 75 and 76: Table E.2. APPENDIX 6: SQMS Structu

Simulator Quality Management Systems Working Group

Create successful ePaper yourself

Delete template?

Save as template?