Lighting Electronics | 2007/08 - National Lamps and Components

BL-HP 1x18-40W HC A-DIMTC-LTC-FT5cArticle Number: 09 7516Product Highlights• Digital ASIC technology• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects and flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start and operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW18W 22W 24W 40WT5cTC-FTC-LCombination approved Combination ENEC certifiedRated input current (230V)T5c 22 W 0,11 AT5c 40 W 0,19 ATC-L/F 18 W 0,09 ATC-L/F 24 W 0,12 AAdditional Product HighlightsEN 60929 EN 61000-3-2ECG,1...10VTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA103 x 67 x 30 mmca. 145 gENEC, VDETechnical Drawing10393,54,2110( )4,283.54,227,5306757,542Subject to technical modification