Lighting Electronics | 2007/08 - National Lamps and Components

9BL-HP 2x14-35W T5 MS2T5Article Number: 09 7214Product Highlights• 100% Light independent from mains voltage fluctuations• Fast and smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes andthe operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances and a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 0108• Universal terminal blocks for manual and automaticlamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedApproved lamp combinations1T5T5T5T5214W21W28W35WT514WCombination approvedT521WRated input current (230V)2xT5 14 W 0,15 A2xT5 21 W 0,21 A2xT5 28 W 0,28 A2xT5 35 W 0,34 AT528WT535WCombination ENEC certifiedAdditional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2T5 ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT5see table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+55 °C2A20,95c360 x 30 x 21 mmca. 270 gENEC, VDETechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,460Subject to technical modification