Lighting Electronics | 2007/08 - National Lamps and Components

x xx xx xx xx xx xx xx xx xx xx xx xx xET 100-210VA LEArticle Number: 09 6851Product Highlights• Light weight• Short-circuit, overload and over-temperature protection• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Dimmable with trailing edge dimmer• Constant voltage for complete load range• Loop in loop out primary connection• Complies to all relevant standards• Dimmer compatibility load indicationET 6-WAY CONNECTORArticle Number: 09 6719Product Highlights• Light weight• Compact housing• 6 fully shrouded terminals for protection agianst accidental contact(max. 2,5mm²)• max. 100W per connection (12V) or I=8.5A• max. 210W total load (12V) oder I=17.5A• Can also be used with conventional transformers, provided that theyare protected on sec. SideAdditional Product HighlightsAdditional Product HighlightsTechnical DataTechnical DataPower100-210WPowermax. 210WRated VoltageMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperature230 V~50...60 Hz0,99C100...210 VA11,3 V ~ eff930 mA33 kHz220 x 45 x 40 mmca. 9,4 W-20°C...+50°CRated voltageLoad rangeOutput voltageAmbient temperatureTrailing edgeLeading edgeLength x Width x HeightWeight12 V~0-210 VA12 V-20°C...+50 °CJaJa63,5 x 36 x 19 mmca. 9 gWeightca. 295 gTechnical DrawingTechnical Drawing45Transformer4.34.31875363.5x x4018.63.7 63.5 103220www.hueco.com 89