MOUNTING & DEMOUNTING SAFETY INFORMATION - Titan

More documents

Recommendations

Info

Titan Tire Corporation www.titanstore.com 1.800.USA.BEARSafety InformationIMPORTANT!THIS IS THE FIRST STEP IN ALLDEMOUNTING OPERATIONSAlways remove the valve core and exhaust all air froma single tire and from both tires of a dual assembly priorto loosening the first rim clamp nut. Check the valve stem byrunning a piece of wire through the stem to make sure it is notplugged.READ AND FOLLOW SAFETY INSTRUCTIONS.FAILURE TO DO SO COULD RESULT IN SERIOUSINJURY.S-15
1.800.USA.BEAR www.titanstore.com Titan Tire CorporationSafety InformationGENERAL WARNINGSThis symbol indicates a warning message.Failure to heed warnings could lead to serious injury or death.• The task of servicing tires and wheels can be extremely dangerous andshould be performed by trained personnel only, using the correct tools,and following the procedures presented here and in manufacturer’s catalogs,instruction manuals, or other industry and government instructionmaterial.• Always use approved tire and rim combinations for sizes and contours.• Always wear personal protection equipment such as gloves, footwear,eye protection, hearing protection and head gear when servicing tire andwheel components.• Never exceed manufacturer’s recommended tire inflation pressure.• Always use proper lifting techniques, and mechanized lifting aids to moveheavy components and assemblies.• Never try to repair wheel, rim, or tire component parts. Replace all damaged,worn, or suspect parts with good parts.• Never reinflate a tire that has lost air pressure or has been run flat withoutdetermining and correcting the problem.• When conducting routine tire inspections also conduct a visual inspectionof wheel and rim components. Always correct any non-conformities.• Always verify that part numbers and size designation of component partsare correctly matched for the assembly. See pages S-23 and S-24 for partnumber location.• Always place wheel and tire assemblies in restraining devices when inflatingtires. See page S-19, item 11.• Always take care when moving tires and wheels that other people in thearea are not endangered.• Never leave a tire, wheel, or assembly unsecured in a vertical position.• Parts that are cracked, worn, pitted with corrosion, or damaged must bedestroyed, discarded, and replaced with good parts.• Always exhaust all air from the tire prior to demounting.S-16
Page 1 and 2: MOUNTING &DEMOUNTING SAFETYINFORMAT
Page 3 and 4: 1.800.USA.BEAR www.titanstore.com T
Page 15: 1.800.USA.BEAR www.titanstore.com T
Page 35: 1.800.USA.BEAR www.titanstore.com T

MOUNTING & DEMOUNTING SAFETY INFORMATION - Titan

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?