EHD Manual - JS Woodhouse

20Elevator ShutdownWARNING1. Empty Elevator2. Stop Unit3. Lockout PowerA. Normal Shutdown:1. Empty elevator before stopping unit.2. Lockout power source before operator leaves work area.B. Emergency Shutdown:WARNING1. Disconnect and lockout the power source if elevator shuts downunder load. Clear as much hay from elevator as you can. Neverattempt to restart when full.2. Starting the unit under load may result in damage to the elevator.Such damage is considered abuse of the equipment.Cleanup and StorageCAUTIONWhen the operation has been completed:1. Clean entire work area.2. Remove anchors, supports, and chocks.3. Move elevator slowly out of “working” position with towing vehicle -not by hand.4. If not in “transport” position, lower elevator to the “full down” positionimmediately upon clearance of any obstructions.5. Transport to the new work area or storage area. Observe previousmovement and placement instructions. Store elevator in the “fulldown” position with hitch end anchored.11160412170