You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Install the motor mount pipe #3 onto the drive framework #20 using the clamp plates #2 , 5/16" x 3" bolts #4 and5/16" nylon insert lock nuts #1 as shown in illustration below.41Illustration JIt is important that the motor mount pipe be installed as shown below so as to assure proper fitting of shield.Illustration K111604Check and make sure that the 5/16" x 3" boltsare pressed tight against the bottom side of cross tube.12170
Change language